Linux version 2.4.24 (root@debian) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue Feb 17 17:09:06 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=Linux ro root=342 Found and enabled local APIC! Initializing CPU#0 Detected 1715.308 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3420.97 BogoMIPS Memory: 515820k/524224k available (1414k kernel code, 8016k reserved, 623k data, 108k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1715.2308 MHz. ..... host bus clock speed is 100.8958 MHz. cpu: 0, clocks: 1008958, slice: 504479 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb2f0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1039/0645] at 00:00.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Installing knfsd (copyright (C) 1996 okir@monad.swb.de). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected SiS 645 chipset agpgart: AGP aperture is 64M @ 0xe8000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] AGP 0.99 Aperture @ 0xe8000000 64MB [drm] Initialized radeon 1.7.0 20020828 on minor 1 [drm] AGP 0.99 Aperture @ 0xe8000000 64MB [drm] Initialized i810 1.2.1 20020211 on minor 2 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: ST340810A, ATA DISK drive hdb: SAMSUNG SP0411N, ATA DISK drive hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive hdd: CW058D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63 hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=4870/255/63 Partition check: hda: hda1 hda2 hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 > SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 es1371: version v0.32 time 17:10:38 Feb 17 2004 es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x04 es1371: found es1371 rev 4 at io 0xe400 irq 5 es1371: features: joystick 0x0 ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23) Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] usb.c: registered new driver hub host/usb-ohci.c: USB OHCI at membase 0xe0816000, IRQ 11 host/usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] USB 1.0 Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected host/usb-ohci.c: USB OHCI at membase 0xe0818000, IRQ 9 host/usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 108k freed hub.c: new USB device 00:02.2-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x7b2/0x4200) is not claimed by any active driver. hub.c: new USB device 00:02.3-1, assigned address 2 hub.c: USB hub found hub.c: 2 ports detected Adding Swap: 996020k swap-space (priority -1) hub.c: new USB device 00:02.3-1.1, assigned address 3 usb.c: USB device 3 (vend/prod 0x43d/0x60) is not claimed by any active driver. hdc: attached ide-scsi driver. hdd: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: J004 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: J004 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: J004 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: J004 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: J004 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: J004 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: J004 Type: CD-ROM ANSI SCSI revision: 02 Vendor: CyberDrv Model: CW058D CD-R/RW Rev: 140D Type: CD-ROM ANSI SCSI revision: 02 Vendor: CyberDrv Model: CW058D CD-R/RW Rev: 140D Type: CD-ROM ANSI SCSI revision: 02 Vendor: CyberDrv Model: CW058D CD-R/RW Rev: 140D Type: CD-ROM ANSI SCSI revision: 02 Vendor: CyberDrv Model: CW058D CD-R/RW Rev: 140D Type: CD-ROM ANSI SCSI revision: 02 Vendor: CyberDrv Model: CW058D CD-R/RW Rev: 140D Type: CD-ROM ANSI SCSI revision: 02 Vendor: CyberDrv Model: CW058D CD-R/RW Rev: 140D Type: CD-ROM ANSI SCSI revision: 02 Vendor: CyberDrv Model: CW058D CD-R/RW Rev: 140D Type: CD-ROM ANSI SCSI revision: 02 CDCEther.c: CDCEther.c: 0.98.6 7 Jan 2002 Brad Hards and another usb.c: registered new driver CDCEther CDCEther.c: Ethernet information found at device configuration. Trying to use it anyway. CDCEther.c: Found Header descriptor, CDC version 110. CDCEther.c: Imperfect filtering support - need sw hashing CDCEther.c: Can't use SetEthernetMulticastFilters request CDCEther.c: detected BULK OUT packets of size 64 CDCEther.c: interrupt address: 5 CDCEther.c: interrupt interval: 64 CDCEther.c: eth0: Motorola Corporation SB4200 USB Cable Modem 00080E973E97 CDCEther.c: eth0: 00:08:0E:97:3E:97 8139too Fast Ethernet driver 0.9.26 eth1: RealTek RTL8139 at 0xe08aa000, 00:50:fc:ca:85:8b, IRQ 11 eth1: Identified 8139 chip type 'RTL-8100B/8139D' Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1 Attached scsi CD-ROM sr2 at scsi0, channel 0, id 0, lun 2 Attached scsi CD-ROM sr3 at scsi0, channel 0, id 0, lun 3 Attached scsi CD-ROM sr4 at scsi0, channel 0, id 0, lun 4 Attached scsi CD-ROM sr5 at scsi0, channel 0, id 0, lun 5 Attached scsi CD-ROM sr6 at scsi0, channel 0, id 0, lun 6 Attached scsi CD-ROM sr7 at scsi0, channel 0, id 1, lun 0 Attached scsi CD-ROM sr8 at scsi0, channel 0, id 1, lun 1 Attached scsi CD-ROM sr9 at scsi0, channel 0, id 1, lun 2 Attached scsi CD-ROM sr10 at scsi0, channel 0, id 1, lun 3 Attached scsi CD-ROM sr11 at scsi0, channel 0, id 1, lun 4 Attached scsi CD-ROM sr12 at scsi0, channel 0, id 1, lun 5 Attached scsi CD-ROM sr13 at scsi0, channel 0, id 1, lun 6 sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray sr2: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray sr3: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray sr4: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray sr5: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray sr6: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray sr7: scsi3-mmc drive: 4x/48x writer cd/rw xa/form2 cdda tray sr8: scsi3-mmc drive: 4x/48x writer cd/rw xa/form2 cdda tray sr9: scsi3-mmc drive: 4x/48x writer cd/rw xa/form2 cdda tray sr10: scsi3-mmc drive: 4x/48x writer cd/rw xa/form2 cdda tray sr11: scsi3-mmc drive: 4x/48x writer cd/rw xa/form2 cdda tray sr12: scsi3-mmc drive: 4x/48x writer cd/rw xa/form2 cdda tray sr13: scsi3-mmc drive: 4x/48x writer cd/rw xa/form2 cdda tray hub.c: new USB device 00:02.3-1.2, assigned address 4 usb.c: USB device 4 (vend/prod 0x43d/0x69) is not claimed by any active driver. eth1: link down