On 12/30/2014 02:41 AM, Mihamina Rakotomandimby wrote:
Hi all,
I have a Develop ineo 25e printer, and want to set it up
with CUPS. I connect to http://localhost:631/ and add the
printer, with uploading the PPD available here:
http://www.develop.eu/en/products/office-products/colour/ineo-25/downloads.html
(English, Linux, version 1.1 dated 2012)
The printer is network connected, and the connection is
socket://192.168.129.100 job-sheets=none, none
media=iso_a4_210x297mm sides=one-sided
I tried several combinations, with or without the PPD,
socket:// or ipp://,... no way: The test page prints OK, but
any other page is a kind of source code I could not define.
Would you know what option could save me?
Thanks.
When you performed the test page print, was that order sent from
the front panel of the printer or from one of the networked
computers?
This sounds like it could be a communications error. The
simplest and first thing I'd try in a case like this is to reset
the printer itself by cycling it's power.
You might also check the cable connections to be certain they're
secure.
If neither of those suggestions work, you might try telling us
what you've tried in the way of troubleshooting, and any error
messages that you might discern in the printer output -- though
it sounds as though there won't be anything decipherable there.
Best regards,
JP
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/54a28aee.7030...@comcast.net
