[    18.508] 
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    18.509] X Protocol Version 11, Revision 0
[    18.509] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[    18.509] Current Operating System: Linux m10 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) i686
[    18.509] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=e23cd5bf-7102-4a25-b63c-b38b75974783 ro quiet
[    18.509] Build Date: 11 February 2015  01:14:26AM
[    18.509] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
[    18.509] Current version of pixman: 0.32.6
[    18.509] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    18.509] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.510] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 27 14:02:54 2015
[    18.529] (==) Using config file: "/etc/X11/xorg.conf"
[    18.529] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.547] (==) ServerLayout "X.org Configured"
[    18.547] (**) |-->Screen "Screen0" (0)
[    18.547] (**) |   |-->Monitor "Monitor0"
[    18.553] (**) |   |-->Device "Card0"
[    18.553] (**) |-->Input Device "Mouse0"
[    18.553] (**) |-->Input Device "Keyboard0"
[    18.553] (==) Automatically adding devices
[    18.553] (==) Automatically enabling devices
[    18.553] (==) Automatically adding GPU devices
[    18.579] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.579] 	Entry deleted from font path.
[    18.606] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.606] 	Entry deleted from font path.
[    18.606] (**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    18.606] (**) ModulePath set to "/usr/lib/xorg/modules"
[    18.607] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    18.607] (WW) Disabling Mouse0
[    18.607] (WW) Disabling Keyboard0
[    18.607] (II) Loader magic: 0xb7763700
[    18.607] (II) Module ABI versions:
[    18.607] 	X.Org ANSI C Emulation: 0.4
[    18.607] 	X.Org Video Driver: 18.0
[    18.607] 	X.Org XInput driver : 21.0
[    18.607] 	X.Org Server Extension : 8.0
[    18.633] (--) PCI:*(0:1:0:0) 1106:3344:1106:3344 rev 1, Mem @ 0xf0000000/67108864, 0xf4000000/16777216
[    18.634] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    18.634] (II) LoadModule: "glx"
[    18.635] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.987] (II) Module glx: vendor="X.Org Foundation"
[    18.987] 	compiled for 1.16.4, module version = 1.0.0
[    18.987] 	ABI class: X.Org Server Extension, version 8.0
[    18.987] (==) AIGLX enabled
[    18.987] (II) LoadModule: "openchrome"
[    19.081] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[    19.114] (II) Module openchrome: vendor="http://openchrome.org/"
[    19.114] 	compiled for 1.15.99.904, module version = 0.3.3
[    19.114] 	Module class: X.Org Video Driver
[    19.114] 	ABI class: X.Org Video Driver, version 18.0
[    19.114] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
	K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
	CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820,
	VX855/VX875, VX900
[    19.115] (++) using VT number 7

[    19.125] (!!) VIA Technologies does not support this driver in any way.
[    19.126] (!!) For support, please refer to http://www.openchrome.org/.
[    19.129] (!!) (openchrome 0.3.3 release)
[    19.129] (II) CHROME(0): VIAPreInit
[    19.129] (II) CHROME(0): VIAGetRec
[    19.130] (--) CHROME(0): Chipset: VM800/P4M800Pro/VN800/CN700
[    19.130] (--) CHROME(0): Chipset revision: 0
[    19.381] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
[    19.381] (II) Loading sub module "vgahw"
[    19.381] (II) LoadModule: "vgahw"
[    19.382] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    19.401] (II) Module vgahw: vendor="X.Org Foundation"
[    19.401] 	compiled for 1.16.4, module version = 0.1.0
[    19.401] 	ABI class: X.Org Video Driver, version 18.0
[    19.401] (--) CHROME(0): Probed amount of VideoRAM = 16384 kB
[    19.401] (II) CHROME(0): VIAMapMMIO
[    19.401] (--) CHROME(0): mapping MMIO @ 0xf4000000 with size 0xd000
[    19.402] (--) CHROME(0): mapping BitBlt MMIO @ 0xf4200000 with size 0x200000
[    19.402] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    19.402] (II) CHROME(0): VIAMapFB
[    19.402] (--) CHROME(0): mapping framebuffer @ 0xf0000000 with size 0x1000000
[    19.405] (--) CHROME(0): Frame buffer start: 0xb590a000, free start: 0x0 end: 0x1000000
[    19.405] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[    19.405] (==) CHROME(0): RGB weight 888
[    19.405] (==) CHROME(0): Default visual is TrueColor
[    19.405] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[    19.405] (**) CHROME(0): Option "I2CScan"
[    19.405] (**) CHROME(0): Option "NoAccel" "true"
[    19.405] (**) CHROME(0): Option "ActiveDevice" "LCD"
[    19.406] (==) CHROME(0): Shadow framebuffer is disabled.
[    19.406] (**) CHROME(0): Hardware acceleration is disabled.
[    19.406] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
[    19.406] (==) CHROME(0): GPU virtual command queue will be enabled.
[    19.406] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[    19.406] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
[    19.406] (==) CHROME(0): AGP DMA will be used for 2D acceleration.
[    19.406] (==) CHROME(0): PCI DMA will be used for XV image transfer if DRI is enabled.
[    19.406] (==) CHROME(0): Will not enable VBE modes.
[    19.406] (==) CHROME(0): VBE VGA register save & restore will not be used
	if VBE modes are enabled.
[    19.406] (==) CHROME(0): Xv Bandwidth check is enabled.
[    19.406] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[    19.406] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[    19.406] (==) CHROME(0): TV dotCrawl is disabled.
[    19.406] (==) CHROME(0): TV deflicker is set to 0.
[    19.406] (==) CHROME(0): No default TV type is set.
[    19.406] (==) CHROME(0): No default TV output signal type is set.
[    19.406] (==) CHROME(0): No default TV output port is set.
[    19.406] (==) CHROME(0): Will not print VGA registers.
[    19.406] (**) CHROME(0): Will scan I2C buses.
[    19.407] (II) CHROME(0): ...Finished parsing config file options.
[    19.407] (WW) CHROME(0): Manufacturer plainly copied main PCI IDs to subsystem/card IDs.
[    19.407] (--) CHROME(0): Detected VIA VT3344 (VM800) - EPIA EN. Card-Ids (1106|3344)
[    19.411] (II) CHROME(0): Detected MemClk 3
[    19.411] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 3
[    19.411] (II) CHROME(0): Detected TV standard: PAL.
[    19.411] (II) Loading sub module "ramdac"
[    19.411] (II) LoadModule: "ramdac"
[    19.411] (II) Module "ramdac" already built-in
[    19.411] (II) Loading sub module "i2c"
[    19.411] (II) LoadModule: "i2c"
[    19.411] (II) Module "i2c" already built-in
[    19.411] (II) CHROME(0): ViaI2CInit
[    19.411] (II) CHROME(0): ViaI2CBus1Init
[    19.411] (II) CHROME(0): I2C bus "I2C bus 1" initialized.
[    19.411] (II) CHROME(0): ViaI2cBus2Init
[    19.411] (II) CHROME(0): I2C bus "I2C bus 2" initialized.
[    19.411] (II) CHROME(0): ViaI2CBus3Init
[    19.411] (II) CHROME(0): I2C bus "I2C bus 3" initialized.
[    19.412] (II) CHROME(0): ViaI2CScan: Scanning I2C bus 2
[    19.496] (II) CHROME(0): ViaI2CScan: Scanning I2C bus 3
[    19.558] (--) CHROME(0): Found slave on I2C bus 3 - 0xA0
[    19.586] (II) Loading sub module "ddc"
[    19.586] (II) LoadModule: "ddc"
[    19.586] (II) Module "ddc" already built-in
[    19.587] (II) CHROME(0): ViaOutputsDetect
[    19.587] (==) CHROME(0): LVDS-0 : Digital output bus width is 12 bits.
[    19.587] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
[    19.587] (==) CHROME(0): LVDS Panel will not be forced.
[    19.587] (==) CHROME(0): Panel size is not selected from config file.
[    19.587] (II) CHROME(0): Output VGA-1 using monitor section Monitor0
[    19.594] (II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
[    19.984] (II) CHROME(0): EDID for output VGA-1
[    19.984] (II) CHROME(0): Manufacturer: BMM  Model: 237  Serial#: 142954
[    19.984] (II) CHROME(0): Year: 2002  Week: 33
[    19.984] (II) CHROME(0): EDID Version: 1.1
[    19.984] (II) CHROME(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    19.984] (II) CHROME(0): Sync:  Separate
[    19.984] (II) CHROME(0): Max Image Size [cm]: horiz.: 30  vert.: 24
[    19.985] (II) CHROME(0): Gamma: 2.00
[    19.985] (II) CHROME(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    19.985] (II) CHROME(0): redX: 0.625 redY: 0.380   greenX: 0.345 greenY: 0.604
[    19.985] (II) CHROME(0): blueX: 0.180 blueY: 0.154   whiteX: 0.329 whiteY: 0.225
[    19.985] (II) CHROME(0): Supported established timings:
[    19.985] (II) CHROME(0): 720x400@70Hz
[    19.985] (II) CHROME(0): 640x480@60Hz
[    19.985] (II) CHROME(0): 640x480@72Hz
[    19.985] (II) CHROME(0): 640x480@75Hz
[    19.985] (II) CHROME(0): 800x600@60Hz
[    19.985] (II) CHROME(0): 800x600@72Hz
[    19.985] (II) CHROME(0): 800x600@75Hz
[    19.985] (II) CHROME(0): 1024x768@60Hz
[    19.985] (II) CHROME(0): 1024x768@70Hz
[    19.985] (II) CHROME(0): 1024x768@75Hz
[    19.985] (II) CHROME(0): Manufacturer's mask: 0
[    19.985] (II) CHROME(0): Supported detailed timing:
[    19.985] (II) CHROME(0): clock: 78.8 MHz   Image Size:  30 x 22 mm
[    19.986] (II) CHROME(0): h_active: 1024  h_sync: 1040  h_sync_end 1136 h_blank_end 1312 h_border: 0
[    19.986] (II) CHROME(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 800 v_border: 0
[    19.986] (II) CHROME(0): Monitor name: 567
[    19.986] (II) CHROME(0): Ranges: V min: 60 V max: 75 Hz, H min: 31 H max: 60 kHz, PixClock max 85 MHz
[    19.986] (II) CHROME(0):  FZWJ280142954
[    19.986] (II) CHROME(0): EDID (in hex):
[    19.986] (II) CHROME(0): 	00ffffffffffff0009ad37026a2e0200
[    19.986] (II) CHROME(0): 	210c0101081e1864e81726a061589a2e
[    19.986] (II) CHROME(0): 	275439adce0000000000000000000000
[    19.986] (II) CHROME(0): 	000000000000c31e0020410020301060
[    19.986] (II) CHROME(0): 	13001e1600000000000000fc00353637
[    19.986] (II) CHROME(0): 	00000031354c000a2000000000fd003c
[    19.986] (II) CHROME(0): 	4b1f3c0800001e1600000000000000fe
[    19.986] (II) CHROME(0): 	00465a574a3238303134323935340047
[    19.986] (--) CHROME(0): DDC pI2CBus1 detected a CRT
[    19.986] (II) CHROME(0): EDID vendor "BMM", prod id 567
[    19.986] (II) CHROME(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[    19.994] (II) CHROME(0): Printing probed modes for output VGA-1
[    19.994] (II) CHROME(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz e)
[    19.994] (II) CHROME(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    19.994] (II) CHROME(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    19.994] (II) CHROME(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    19.994] (II) CHROME(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    19.994] (II) CHROME(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    19.995] (II) CHROME(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    19.995] (II) CHROME(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    19.995] (II) CHROME(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    19.995] (II) CHROME(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    19.995] (II) CHROME(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    19.995] (II) CHROME(0): Output VGA-1 connected
[    19.995] (II) CHROME(0): Using exact sizes for initial modes
[    19.995] (II) CHROME(0): Output VGA-1 using initial mode 1024x768
[    19.995] (II) CHROME(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    19.995] (==) CHROME(0): DPI set to (96, 96)
[    19.995] (II) Loading sub module "fb"
[    19.995] (II) LoadModule: "fb"
[    19.996] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.021] (II) Module fb: vendor="X.Org Foundation"
[    20.022] 	compiled for 1.16.4, module version = 1.0.0
[    20.022] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.022] (--) Depth 24 pixmap format is 32 bpp
[    20.022] (II) CHROME(0): VIAScreenInit
[    20.022] (II) CHROME(0): Frame Buffer From (0,0) To (1024,4096)
[    20.022] (II) CHROME(0): Using 3328 lines for offscreen memory.
[    20.022] 3145728 bytes of Linear memory allocated at 300000, handle 3097191376
[    20.022] (II) CHROME(0): - Visuals set up
[    20.022] (II) CHROME(0): - B & W
[    20.023] (==) CHROME(0): Backing store enabled
[    20.023] (II) CHROME(0): - Backing store set up
[    20.023] (II) CHROME(0): - SW cursor set up
[    20.023] (II) CHROME(0): HWCursor ARGB enabled
[    20.023] 16384 bytes of Linear memory allocated at 600000, handle 3097194504
[    20.023] 16384 bytes of Linear memory allocated at 604000, handle 3097194664
[    20.023] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    20.024] (II) CHROME(0): - Def Color map set up
[    20.024] (II) CHROME(0): - Palette loaded
[    20.024] (II) CHROME(0): - Color maps etc. set up
[    20.024] (==) CHROME(0): DPMS enabled
[    20.024] (II) CHROME(0): - DPMS set up
[    20.024] (II) CHROME(0): VIAEnterVT
[    20.024] (II) CHROME(0): VIASave
[    20.024] (II) CHROME(0): Primary
[    20.392] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[    20.392] (II) CHROME(0): Crtc...
[    20.392] (II) CHROME(0): TVSave...
[    20.392] (II) CHROME(0): VIASave
[    20.392] (II) CHROME(0): Primary
[    20.885] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[    20.885] (II) CHROME(0): Crtc...
[    20.885] (II) CHROME(0): TVSave...
[    20.885] (II) CHROME(0): ViaDisplayDisableCRT
[    20.885] (II) CHROME(0): ViaFirstCRTCModeValid
[    20.885] (II) CHROME(0): ViaDisplayDisableCRT
[    20.885] (II) CHROME(0): ViaModeFirstCRTC
[    20.885] (II) CHROME(0): ViaFirstCRTCSetMode
[    20.886] (II) CHROME(0): Setting up 1024x768
[    20.886] (II) CHROME(0): ViaSetPrimaryFIFO
[    20.886] (II) CHROME(0): ViaSetDotclock to 0x02c049
[    20.886] (II) CHROME(0): ViaSetUseExternalClock
[    20.886] (II) CHROME(0): ViaDisplayDisableSimultaneous
[    20.886] (II) CHROME(0): ViaFirstCRTCSetStartingAddress
[    20.886] (II) CHROME(0): ViaDisplayEnableCRT
[    20.886] (II) CHROME(0): VIALoadRgbLut
[    20.886] (II) CHROME(0): ViaDisplayEnableCRT
[    20.887] 635904 bytes of Linear memory allocated at 608000, handle 3097192168
[    20.913] (II) CHROME(0): Benchmarking video copy.  Less time is better.
[    20.975] (--) CHROME(0): Timed   libc YUV420 copy... 10685724. Throughput: 44.4 MiB/s.
[    21.024] (--) CHROME(0): Timed kernel YUV420 copy... 8507056. Throughput: 55.8 MiB/s.
[    21.066] (--) CHROME(0): Timed    SSE YUV420 copy... 10714988. Throughput: 44.3 MiB/s.
[    21.099] (--) CHROME(0): Timed    MMX YUV420 copy... 7564324. Throughput: 62.8 MiB/s.
[    21.099] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
[    21.131] (--) CHROME(0): Timed   MMX2 YUV420 copy... 5671838. Throughput: 83.7 MiB/s.
[    21.131] Freed 6324224 (pool 4)
[    21.136] (--) CHROME(0): Using MMX2 YUV42X copy for video.
[    21.136] (WW) CHROME(0): [XvMC] Cannot use XvMC without DRI!
[    21.136] (WW) CHROME(0): Option "MigrationHeuristic" is not used
[    21.136] (II) CHROME(0): - Done
[    21.136] (--) RandR disabled
[    21.244] (II) SELinux: Disabled on system
[    21.259] (II) AIGLX: Screen 0 is not DRI2 capable
[    21.259] (EE) AIGLX: reverting to software rendering
[    23.263] (II) AIGLX: Loaded and initialized swrast
[    23.263] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    23.270] (II) CHROME(0): Setting screen physical size to 270 x 203
[    24.100] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    24.100] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.100] (II) LoadModule: "evdev"
[    24.128] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.158] (II) Module evdev: vendor="X.Org Foundation"
[    24.158] 	compiled for 1.16.0, module version = 2.9.0
[    24.158] 	Module class: X.Org XInput Driver
[    24.158] 	ABI class: X.Org XInput driver, version 21.0
[    24.158] (II) Using input driver 'evdev' for 'Power Button'
[    24.158] (**) Power Button: always reports core events
[    24.158] (**) evdev: Power Button: Device: "/dev/input/event2"
[    24.159] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.159] (--) evdev: Power Button: Found keys
[    24.159] (II) evdev: Power Button: Configuring as keyboard
[    24.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[    24.159] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.159] (**) Option "xkb_rules" "evdev"
[    24.159] (**) Option "xkb_model" "pc105"
[    24.164] (**) Option "xkb_layout" "it"
[    24.412] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    24.412] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.412] (II) Using input driver 'evdev' for 'Video Bus'
[    24.412] (**) Video Bus: always reports core events
[    24.412] (**) evdev: Video Bus: Device: "/dev/input/event3"
[    24.413] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    24.413] (--) evdev: Video Bus: Found keys
[    24.413] (II) evdev: Video Bus: Configuring as keyboard
[    24.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input4/event3"
[    24.413] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    24.413] (**) Option "xkb_rules" "evdev"
[    24.413] (**) Option "xkb_model" "pc105"
[    24.413] (**) Option "xkb_layout" "it"
[    24.420] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    24.421] (II) No input driver specified, ignoring this device.
[    24.421] (II) This device may have been added with another device file.
[    24.422] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    24.422] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    24.422] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    24.423] (**) AT Translated Set 2 keyboard: always reports core events
[    24.423] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    24.423] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    24.423] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    24.423] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    24.423] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    24.423] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[    24.423] (**) Option "xkb_rules" "evdev"
[    24.423] (**) Option "xkb_model" "pc105"
[    24.423] (**) Option "xkb_layout" "it"
[    24.431] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[    24.431] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    24.431] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    24.431] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[    24.431] (II) LoadModule: "synaptics"
[    24.437] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    24.448] (II) Module synaptics: vendor="X.Org Foundation"
[    24.449] 	compiled for 1.16.0.901, module version = 1.8.99
[    24.449] 	Module class: X.Org XInput Driver
[    24.449] 	ABI class: X.Org XInput driver, version 21.0
[    24.449] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    24.449] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    24.449] (**) Option "Device" "/dev/input/event6"
[    24.450] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[    24.450] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[    24.450] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    24.450] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    24.450] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    24.450] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    24.450] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    24.451] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    24.451] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    24.451] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[    24.451] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 9)
[    24.451] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    24.451] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[    24.451] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[    24.456] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    24.456] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    24.456] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    24.457] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    24.457] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    24.458] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    24.459] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[    24.464] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event5)
[    24.464] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[    24.464] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[    24.464] (**) ALPS PS/2 Device: always reports core events
[    24.465] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event5"
[    24.465] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[    24.465] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[    24.465] (--) evdev: ALPS PS/2 Device: Found relative axes
[    24.465] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[    24.465] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[    24.465] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[    24.465] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.465] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event5"
[    24.466] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 10)
[    24.466] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[    24.467] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[    24.467] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[    24.467] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[    24.467] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[    24.473] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
[    24.473] (II) No input driver specified, ignoring this device.
[    24.473] (II) This device may have been added with another device file.
[    24.474] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    24.474] (II) No input driver specified, ignoring this device.
[    24.474] (II) This device may have been added with another device file.
[    24.513] (II) CHROME(0): ViaDisplayEnableCRT
[    43.975] (II) CHROME(0): VIALeaveVT
[    43.975] (II) CHROME(0): VIARestore
[    43.975] (II) CHROME(0): ViaDisplayInit
[    43.976] (II) CHROME(0): ViaSecondDisplayChannelDisable
[    43.991] (II) CHROME(0): ViaDisablePrimaryFIFO
[    43.991] (II) CHROME(0): VIARestore
[    43.991] (II) CHROME(0): ViaDisplayInit
[    43.991] (II) CHROME(0): ViaSecondDisplayChannelDisable
[    44.007] (II) CHROME(0): ViaDisablePrimaryFIFO
