U-Boot 2015.07-rc1 (Dec 21 2015 - 15:44:28) for ODROID-XU3 CPU: Exynos5422@800MHz Model: Odroid XU3 based on EXYNOS5422 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 ## Error: "checkboard" not defined 46323 bytes read in 10 ms (4.4 MiB/s) ** File not found uInitrd ** 6999168 bytes read in 390 ms (17.1 MiB/s) Kernel image @ 0x40007fc0 [ 0x000000 - 0x6acc80 ] ## Flattened Device Tree blob at 40800000 Booting using the fdt blob at 0x40800000 Loading Device Tree to 4fff1000, end 4ffff4f2 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0 (samsung@samsung-HP-Compaq-Pro-6380-MT) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Mon Dec 21 19:05:31 CST 2015 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Hardkernel Odroid XU3 [ 0.000000] cma: Reserved 64 MiB at 0xba800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Running under secure firmware. [ 0.000000] PERCPU: Embedded 12 pages/cpu @ee58c000 s16512 r8192 d24448 u49152 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 512850 [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootfstype=ext4 rootwait console=ttySAC2,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1957272K/2058240K available (10386K kernel code, 671K rwdata, 3684K rodata, 728K init, 365K bss, 35432K reserved, 65536K cma-reserved, 1230848K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0dc5cf0 (14072 kB) [ 0.000000] .init : 0xc0dc6000 - 0xc0e7c000 ( 728 kB) [ 0.000000] .data : 0xc0e7c000 - 0xc0f23d04 ( 672 kB) [ 0.000000] .bss : 0xc0f23d04 - 0xc0f7f330 ( 366 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000010] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns [ 0.000928] Console: colour dummy device 80x30 [ 0.000968] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 0.000993] pid_max: default: 32768 minimum: 301 [ 0.001151] Security Framework initialized [ 0.001221] Smack: Initializing. [ 0.001315] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001337] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002469] Initializing cgroup subsys memory [ 0.002537] Initializing cgroup subsys devices [ 0.002565] Initializing cgroup subsys freezer [ 0.002595] Initializing cgroup subsys net_cls [ 0.002653] CPU: Testing write buffer coherency: ok [ 0.002711] ftrace: allocating 34217 entries in 101 pages [ 0.076605] CPU0: update cpu_capacity 448 [ 0.076630] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.076979] Setting up static identity map for 0x4096ab30 - 0x4096ab88 [ 0.077404] ARM CCI driver probed [ 0.077661] Exynos MCPM support installed [ 0.110749] CPU1: update cpu_capacity 1535 [ 0.110757] CPU1: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.120730] CPU2: update cpu_capacity 1535 [ 0.120738] CPU2: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.130707] CPU3: update cpu_capacity 1535 [ 0.130715] CPU3: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.140720] CPU4: update cpu_capacity 1535 [ 0.140728] CPU4: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.150798] CPU5: update cpu_capacity 448 [ 0.150807] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.160790] CPU6: update cpu_capacity 448 [ 0.160799] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.170762] CPU7: update cpu_capacity 448 [ 0.170770] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.170883] Brought up 8 CPUs [ 0.170956] SMP: Total of 8 processors activated (384.00 BogoMIPS). [ 0.170969] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a) [ 0.170980] CPU: This may indicate a broken bootloader or firmware. [ 0.172211] devtmpfs: initialized [ 0.175383] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3 [ 0.182206] pinctrl core: initialized pinctrl subsystem [ 0.214041] NET: Registered protocol family 16 [ 0.215998] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.235764] cpuidle: using governor ladder [ 0.255798] cpuidle: using governor menu [ 0.280392] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 0.293155] EXYNOS5420 PMU initialized [ 0.361792] SCSI subsystem initialized [ 0.362483] usbcore: registered new interface driver usbfs [ 0.362637] usbcore: registered new interface driver hub [ 0.362900] usbcore: registered new device driver usb [ 0.383837] vdd_ldo9: ramp_delay not set [ 0.393192] vdd_ldo13: ramp_delay not set [ 0.398511] vdd_ldo15: ramp_delay not set [ 0.407726] vdd_sd: ramp_delay not set [ 0.455518] s3c-i2c 12c60000.i2c: slave address 0x00 [ 0.455542] s3c-i2c 12c60000.i2c: bus frequency set to 65 KHz [ 0.456812] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter [ 0.457074] s3c-i2c 12c80000.i2c: slave address 0x00 [ 0.457096] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz [ 0.457681] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter [ 0.457930] media: Linux media interface: v0.10 [ 0.458060] Linux video capture interface: v2.00 [ 0.562022] Advanced Linux Sound Architecture Driver Initialized. [ 0.563218] Bluetooth: Core ver 2.20 [ 0.563306] NET: Registered protocol family 31 [ 0.563320] Bluetooth: HCI device and connection manager initialized [ 0.563347] Bluetooth: HCI socket layer initialized [ 0.563371] Bluetooth: L2CAP socket layer initialized [ 0.563454] Bluetooth: SCO socket layer initialized [ 0.564145] cfg80211: Calling CRDA to update world regulatory domain [ 0.564273] NetLabel: Initializing [ 0.564286] NetLabel: domain hash size = 128 [ 0.564298] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.564377] NetLabel: unlabeled traffic allowed by default [ 0.564654] Switched to clocksource mct-frc [ 0.674834] NET: Registered protocol family 2 [ 0.676200] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.676383] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.676838] TCP: Hash tables configured (established 8192 bind 8192) [ 0.677014] TCP: reno registered [ 0.677041] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.677130] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.677610] NET: Registered protocol family 1 [ 0.678155] RPC: Registered named UNIX socket transport module. [ 0.678173] RPC: Registered udp transport module. [ 0.678185] RPC: Registered tcp transport module. [ 0.678197] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.681870] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.682153] audit: initializing netlink subsys (disabled) [ 0.682245] audit: type=2000 audit(0.645:1): initialized [ 0.710640] NFS: Registering the id_resolver key type [ 0.710706] Key type id_resolver registered [ 0.710720] Key type id_legacy registered [ 0.710829] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.711587] fuse init (API version 7.23) [ 0.712792] kdbus: initialized [ 0.717050] bounce: pool size: 64 pages [ 0.717075] io scheduler noop registered [ 0.717094] io scheduler deadline registered [ 0.717547] io scheduler cfq registered (default) [ 0.718935] exynos-mipi-video-phy 10040714.video-phy: regmap lookup failed: -19 [ 0.718970] exynos-mipi-video-phy 10040714.video-phy: can't request region for resource [mem 0x10040714-0x1004071f] [ 0.719007] exynos-mipi-video-phy: probe of 10040714.video-phy failed with error -16 [ 0.721785] 12100000.phy supply vbus not found, using dummy regulator [ 0.721944] 12100000.phy supply vbus-boost not found, using dummy regulator [ 0.722662] 12500000.phy supply vbus not found, using dummy regulator [ 0.722775] 12500000.phy supply vbus-boost not found, using dummy regulator [ 0.728501] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 0.728525] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.735564] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.735589] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.742592] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.742617] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.744780] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.744804] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.906099] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.909414] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 75, base_baud = 0) is a S3C6400/10 [ 0.910284] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 76, base_baud = 0) is a S3C6400/10 [ 0.911079] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 77, base_baud = 0) is a S3C6400/10 [ 1.767028] console [ttySAC2] enabled [ 1.771450] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 78, base_baud = 0) is a S3C6400/10 [ 1.782426] Mali: Mali device driver loaded [ 1.786295] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0 [ 1.792759] mali 11800000.mali: Probed as mali0 [ 1.796958] [drm] Initialized drm 1.1.0 20060810 [ 1.804585] 14530000.hdmi supply hdmi-en not found, using dummy regulator [ 1.812427] exynos-drm-gsc 13e00000.video-scaler: failed to get system register. [ 1.818665] exynos-drm-gsc 13e00000.video-scaler: drm gsc registered successfully. [ 1.826040] exynos-drm-gsc 13e10000.video-scaler: failed to get system register. [ 1.833559] exynos-drm-gsc 13e10000.video-scaler: drm gsc registered successfully. [ 1.841563] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully. [ 1.851133] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 1.857580] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 1.864454] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.871028] [drm] No driver support for vblank timestamp query. [ 2.050552] Console: switching to colour frame buffer device 274x77 [ 2.078980] exynos-drm exynos-drm: fb0: frame buffer device [ 2.084609] exynos-drm exynos-drm: registered panic notifier [ 2.104724] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 2.128860] brd: module loaded [ 2.143728] loop: module loaded [ 2.147087] tun: Universal TUN/TAP device driver, 1.6 [ 2.150723] tun: (C) 1999-2004 Max Krasnyansky [ 2.157596] PPP generic driver version 2.4.2 [ 2.161506] PPP BSD Compression module registered [ 2.165792] PPP Deflate Compression module registered [ 2.171002] usbcore: registered new interface driver rtl8192cu [ 2.176769] usbcore: registered new interface driver rt2800usb [ 2.182550] usbcore: registered new interface driver r8152 [ 2.188030] usbcore: registered new interface driver asix [ 2.193365] usbcore: registered new interface driver ax88179_178a [ 2.199430] usbcore: registered new interface driver cdc_ether [ 2.205277] usbcore: registered new interface driver smsc75xx [ 2.211002] usbcore: registered new interface driver smsc95xx [ 2.216688] usbcore: registered new interface driver net1080 [ 2.222312] usbcore: registered new interface driver cdc_subset [ 2.228200] usbcore: registered new interface driver zaurus [ 2.233809] usbcore: registered new interface driver cdc_ncm [ 2.240690] usb@12000000 supply vdd33 not found, using dummy regulator [ 2.245898] usb@12000000 supply vdd10 not found, using dummy regulator [ 2.661389] usb@12400000 supply vdd33 not found, using dummy regulator [ 2.666806] usb@12400000 supply vdd10 not found, using dummy regulator [ 3.075592] dwc3 12400000.dwc3: dwc3_otg address space is not supported [ 3.080776] usb@12400000 supply dwc3-vbus not found, using dummy regulator [ 3.090620] dwc3 12400000.dwc3: Binding gadget dwc3-gadget [ 3.094685] dwc3 12400000.dwc3: Turn on gadget dwc3-gadget [ 3.101329] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.105634] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 3.113822] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 3.122051] xhci-hcd xhci-hcd.2.auto: irq 142, io mem 0x12000000 [ 3.128429] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.134682] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.141833] usb usb1: Product: xHCI Host Controller [ 3.146685] usb usb1: Manufacturer: Linux 4.0.0 xhci-hcd [ 3.151970] usb usb1: SerialNumber: xhci-hcd.2.auto [ 3.159237] hub 1-0:1.0: USB hub found [ 3.161665] hub 1-0:1.0: 1 port detected [ 3.167006] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.171131] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 3.179362] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.185466] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.192646] usb usb2: Product: xHCI Host Controller [ 3.197505] usb usb2: Manufacturer: Linux 4.0.0 xhci-hcd [ 3.202788] usb usb2: SerialNumber: xhci-hcd.2.auto [ 3.210076] hub 2-0:1.0: USB hub found [ 3.212447] hub 2-0:1.0: 1 port detected [ 3.217145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.222845] ehci-exynos: EHCI EXYNOS driver [ 3.227586] exynos-ehci 12110000.usb: EHCI Host Controller [ 3.232460] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 3 [ 3.240420] exynos-ehci 12110000.usb: irq 136, io mem 0x12110000 [ 3.254733] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 3.259710] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.266234] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.273253] usb usb3: Product: EHCI Host Controller [ 3.278103] usb usb3: Manufacturer: Linux 4.0.0 ehci_hcd [ 3.283381] usb usb3: SerialNumber: 12110000.usb [ 3.289328] hub 3-0:1.0: USB hub found [ 3.291759] hub 3-0:1.0: 3 ports detected [ 3.297009] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.301871] ohci-exynos: OHCI EXYNOS driver [ 3.306460] exynos-ohci 12120000.usb: USB Host Controller [ 3.311416] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 4 [ 3.319467] exynos-ohci 12120000.usb: irq 136, io mem 0x12120000 [ 3.384037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.389385] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.396822] usb usb4: Product: USB Host Controller [ 3.401344] usb usb4: Manufacturer: Linux 4.0.0 ohci_hcd [ 3.406621] usb usb4: SerialNumber: 12120000.usb [ 3.412484] hub 4-0:1.0: USB hub found [ 3.414998] hub 4-0:1.0: 3 ports detected [ 3.420367] usbcore: registered new interface driver usb-storage [ 3.425197] usbcore: registered new interface driver usbserial [ 3.430854] usbcore: registered new interface driver option [ 3.436379] usbserial: USB Serial support registered for GSM modem (1-port) [ 3.444873] mousedev: PS/2 mouse device common for all mice [ 3.458982] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0 [ 3.464499] i2c /dev entries driver [ 3.470846] IR NEC protocol handler initialized [ 3.473905] IR RC5(x/sz) protocol handler initialized [ 3.478970] IR RC6 protocol handler initialized [ 3.483472] IR JVC protocol handler initialized [ 3.487977] IR Sony protocol handler initialized [ 3.492570] IR SANYO protocol handler initialized [ 3.497436] IR Sharp protocol handler initialized [ 3.501938] IR MCE Keyboard/mouse protocol handler initialized [ 3.507735] IR XMP protocol handler initialized [ 3.515658] s5p-jpeg 11f50000.jpeg: sclk clock not available [ 3.520465] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0 [ 3.527251] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video1 [ 3.533921] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec [ 3.539608] s5p-jpeg 11f60000.jpeg: sclk clock not available [ 3.545390] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video2 [ 3.552690] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video3 [ 3.559050] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec [ 3.565072] s5p_mfc_init_pm:56: Failed to get MFC special clock control [ 3.572865] s5p-mfc 11000000.codec: decoder registered as /dev/video4 [ 3.578242] s5p-mfc 11000000.codec: encoder registered as /dev/video5 [ 3.585374] usbcore: registered new interface driver dvb_usb_dib0700 [ 3.590750] usbcore: registered new interface driver dvb_usb_mxl111sf [ 3.597210] usbcore: registered new interface driver uvcvideo [ 3.602726] USB Video Class driver (1.1.1) [ 3.606881] usb 3-1: new high-speed USB device number 2 using exynos-ehci [ 3.613635] au0828: au0828 driver loaded [ 3.617741] usbcore: registered new interface driver au0828 [ 3.625250] thermal thermal_zone0: failed to read out thermal zone (-22) [ 3.630566] 10060000.tmu supply vtmu not found, using dummy regulator [ 3.637496] thermal thermal_zone1: failed to read out thermal zone (-22) [ 3.643639] 10064000.tmu supply vtmu not found, using dummy regulator [ 3.650475] thermal thermal_zone2: failed to read out thermal zone (-22) [ 3.656772] 10068000.tmu supply vtmu not found, using dummy regulator [ 3.663686] thermal thermal_zone3: failed to read out thermal zone (-22) [ 3.670134] 1006c000.tmu supply vtmu not found, using dummy regulator [ 3.676734] thermal thermal_zone4: failed to read out thermal zone (-22) [ 3.682885] 100a0000.tmu supply vtmu not found, using dummy regulator [ 3.691187] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 3.699120] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com [ 3.706428] Bluetooth: HCI UART driver ver 2.2 [ 3.711010] usbcore: registered new interface driver btusb [ 3.719183] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 3.729400] cpu cpu1: bL_cpufreq_init: CPU 1 initialized [ 3.736504] arm_big_little: bL_cpufreq_register: Registered platform driver: dt-bl [ 3.742934] Driver 'mmcblk' needs updating - please use bus_type methods [ 3.749355] sdhci: Secure Digital Host Controller Interface driver [ 3.755468] sdhci: Copyright(c) Pierre Ossman [ 3.759938] usb 3-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.766436] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.770035] Synopsys Designware Multimedia Card Interface Driver [ 3.771812] dwmmc_exynos 12200000.mmc: num-slots property not found, assuming 1 slot is available [ 3.771984] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 3.772112] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 3.772126] dwmmc_exynos 12200000.mmc: Version ID is 250a [ 3.772239] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo [ 3.772297] dwmmc_exynos 12200000.mmc: No vmmc regulator found [ 3.772305] dwmmc_exynos 12200000.mmc: No vqmmc regulator found [ 3.772825] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq [ 3.799946] dwmmc_exynos 12200000.mmc: 1 slots initialized [ 3.800509] dwmmc_exynos 12220000.mmc: num-slots property not found, assuming 1 slot is available [ 3.800661] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 3.800765] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 3.800779] dwmmc_exynos 12220000.mmc: Version ID is 250a [ 3.800899] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108, 64 bit host data width, 64 deep fifo [ 3.800957] dwmmc_exynos 12220000.mmc: No vmmc regulator found [ 3.800965] dwmmc_exynos 12220000.mmc: No vqmmc regulator found [ 3.801061] dwmmc_exynos 12220000.mmc: Got CD GPIO [ 3.830049] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 3.830426] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.832049] hidraw: raw HID events driver (C) Jiri Kosina [ 3.834729] usbcore: registered new interface driver usbhid [ 3.834733] usbhid: USB HID core driver [ 3.836406] usbcore: registered new interface driver snd-usb-audio [ 3.838556] platform sound: Driver asoc-simple-card requests probe deferral [ 3.840779] u32 classifier [ 3.840783] Actions configured [ 3.840835] Netfilter messages via NETLINK v0.30. [ 3.840936] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.842029] ctnetlink v0.93: registering with nfnetlink. [ 3.842549] xt_time: kernel timezone is -0000 [ 3.842942] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.843121] arp_tables: (C) 2002 David S. Miller [ 3.843204] TCP: bic registered [ 3.843213] TCP: cubic registered [ 3.843220] Initializing XFRM netlink socket [ 3.844918] NET: Registered protocol family 10 [ 3.846006] mip6: Mobile IPv6 [ 3.846044] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.846342] sit: IPv6 over IPv4 tunneling driver [ 3.848493] NET: Registered protocol family 17 [ 3.848528] NET: Registered protocol family 15 [ 3.848583] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 3.848615] Bridge firewalling registered [ 3.848626] Ebtables v2.0 registered [ 3.848861] Bluetooth: RFCOMM TTY layer initialized [ 3.848877] Bluetooth: RFCOMM socket layer initialized [ 3.848908] Bluetooth: RFCOMM ver 1.11 [ 3.848929] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.848942] Bluetooth: HIDP socket layer initialized [ 3.849012] 8021q: 802.1Q VLAN Support v1.8 [ 3.849080] Key type dns_resolver registered [ 3.849829] Registering SWP/SWPB emulation handler [ 3.880111] max98090 5-0010: MAX98090 REVID=0x43 [ 3.888421] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 3.892164] power-domain@10044120: Power-off latency exceeded, new value 323417 ns [ 3.892407] power-domain@10044020: Power-off latency exceeded, new value 302625 ns [ 3.895975] using random self ethernet address [ 3.895990] using random host ethernet address [ 3.896091] slp_multi_composite gadget: slp_multi_composite ready [ 4.048768] mmc0: MAN_BKOPS_EN bit is not set [ 4.055656] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 4.056316] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 4.057549] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 4.057570] mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) [ 4.057918] mmc0: new HS400 MMC card at address 0001 [ 4.058558] mmcblk0: mmc0:0001 SDW32G 29.1 GiB [ 4.058813] mmcblk0boot0: mmc0:0001 SDW32G partition 1 4.00 MiB [ 4.059042] mmcblk0boot1: mmc0:0001 SDW32G partition 2 4.00 MiB [ 4.059281] mmcblk0rpmb: mmc0:0001 SDW32G partition 3 4.00 MiB [ 4.061313] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 4.180089] hub 3-1:1.0: USB hub found [ 4.182586] hub 3-1:1.0: 5 ports detected [ 4.298022] dwc3 12400000.dwc3: failed to enable ep0out [ 4.301761] dwc3 12400000.dwc3: failed to initialize udc [ 4.307851] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 4.315945] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01 00:01:01 UTC (946684861) [ 4.359333] ALSA device list: [ 4.360855] #0: Od[ 4.369744] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.376416] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.385736] devtmpfs: mounted [ 4.387582] Freeing unused kernel memory: 728K (c0dc6000 - c0e7c000) [ 4.440575] systemd[1]: Successfully loaded Smack policies. [ 4.445485] systemd[1]: Successfully loaded Smack/CIPSO policies. [ 4.454991] random: systemd urandom read with 128 bits of entropy avá[ 4.463580] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT -LIBCRYPTSETUP -) [ 4.469850] usb 3-1.1: new high-speed USB device number 3 using exynos-ehci [ 4.486618] random: nonblocking pool is initialized [ 4.491683] systemd[1]: Detected architecture 'arm'. Welcome to Linux! [ 4.511318] systemd[1]: Set hostname to . [ 4.515759] systemd[1]: Initializing machine ID from random generator. [ 4.521410] systemd[1]: Installed transient /etc/machine-id file. [ 4.575076] usb 3-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 4.580495] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.590704] smsc95xx v1.0.4 [ 4.603236] systemd[1]: Configuration file /lib/systemd/system/smack-rules.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 4.616553] systemd[1]: Configuration file /lib/systemd/system/smack-rules.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Pro. [ 4.644543] smsc95xx 3-1.1:1.0 eth0: register 'smsc95xx' at usb-12110000.usb-1.1, smsc95xx USB 2.0 Ethernet, d2:87:c5:d0:c2:8d [ 4.676130] systemd[1]: Cannot add dependency job for unit vconf-setup.service, ignoring: Unit vconf-setup.service failed to load: No such file or directory. [ 4.688874] systemd[1]: Cannot add dependency job for unit media-server.service, ignoring: Unit vconf-setup.service failed to load: No such file or directory. [ 4.702905] systemd[1]: Cannot add dependency job for unit serial-getty@ttySAC2.service, ignoring: Unit serial-getty@ttySAC2.service failed to load: No such file or directory. [ 4.719559] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 4.726404] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.733647] systemd[1]: Starting Login [ OK ] Reached target Login Prompts. [ 4.749743] systemd[1]: Reached target Login Prompts. [ 4.753461] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.762747] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 4.770914] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.778570] systemd[1]: StartiÞ[ OK ] Reached target Paths. [ 4.794737] systemd[1]: Reached target Paths. [ 4.797631] systemd[1]: StartÑ[ OK ] Reached target Swap. [ 4.809734] systemd[1]: Reached target Swap. [ 4.812541] systemd[1]: Starting Root Slice. [ 4.863977] systemd[1]: Failed to set memory.limit_in_bytes on : Invalid á[ OK ] Created slice Root Slice. [ 4.879936] systemd[1]: Created slice Root Slice. [ 4.883186] systemd[1]: Starting Delayed Shutdown@[ OK ] Listening on Delayed Shutdown Socket. [ 4.899736] systemd[1]: Listening on Delayed Shutdown Socket. [ 4.904016] systemd[1]: Starting /dev/initctl Compatibility Nameä[ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.924734] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.930252] systemd[1]: Starting Journal Socket (/deö[ OK ] Listening on Journal Socket (/dev/log). [ 4.949731] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.954181] systemd[1]: Starting User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.974739] systemd[1]: Created slice User and Session Slice. [ 4.979052] systemd[1]: Starting udev Kerneì[ OK ] Listening on udev Kernel Socket. [ 4.994735] systemd[1]: Listening on udev Kernel Socket. [ 4.998610] systemd[1]: Starting udev Control [ OK ] Listening on udev Control Socket. [ 5.014737] systemd[1]: Listening on udev Control Socket. [ 5.018673] systemd[1]: Starting Journal [ OK ] Listening on Journal Socket. [ 5.034741] systemd[1]: Listening on Journal Socket. [ 5.038262] systemd[1]: Starting System Slice. [ OK ] Created slice System Slice. [ 5.054741] systemd[1]: Created slice System Slice. [ 5.059244] systemd[1]: Started Bind mount volatile /var/lib. [ 5.063931] systemd[1]: Starting File System Check on Root à Starting File System Check on Root Device... [ 5.087052] systemd[1]: Mounted POSIX Message Queue File System. [ 5.091729] systemd[1]: Mounted Huge Pages File System. [ 5.101228] systemd[1]: Started Set Up Additional Binary Formats. [ 5.109440] systemd[1]: Started Load Kernel Modules. [ 5.113143] systemd[1]: Mounting Configuration File System... Mounting Configurat[ 5.121258] systemd[1]: Starting Apply Kernel Variables... ion File System... Starting Apply Kernel Variables... [ 5.148559] systemd[1]: Starting Create list of required static device nodes for the current kå Starting Create list of required st... nodes for the current kernel... [ 5.172295] systemd[1]: Mounting Debug File Sñ Mounting Debug File System... [ 5.187190] systemd[1]: Mounting FUSE Control File Sù Mounting FUSE Control File System... [ 5.207129] systemd[1]: Starting prepare device dÁ Starting prepare device daemon... [ 5.227163] systemd[1]: Starting udev Coldplug all De Starting udev Coldplug all Devices... [ 5.248812] systemd[1]: Starting Journal Ser Starting Journal Service... [ OK ] Started Journal Service. [ 5.281608] systemd[1]: Started Journal Service.[ OK ] Reached target Slices. Mounting Temporary Directory... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Debug File System. [ OK ] Mounted Configuration File System. [ OK ] Mounted Temporary Directory. [ OK ] Started File System Check on Root Device. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started prepare device daemon. [ 5.385991] systemd-fsck[1838]: fsck: fsck.auto: No such file or directory Starting Create Static Device Nodes in /dev... Starting Remount Root and Kernel File Systems... [ OK ] Started Create Static Device Nodes in /dev. [ 5.539981] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Started Remount Root and Kernel File Systems. Starting Rebuild Dynamic Linker Cache... Starting Rebuild Hardware Database... Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Journal Catalog... Starting Trigger Flushing of Journal to Persistent Storage... Starting Create Volatile Files and Directories... [ OK ] Started Rebuild Hardware Database. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Load/Save Random Seed. [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. [ 5.810624] systemd-journald[1858]: Received request to flush runtime journal from PID 1 [ OK ] Started Trigger Flushing of Journal to Persistent Storage. Starting Run pending postinsts... Starting Update UTMP about System Boot/Shutdown... Starting udev Wait for Complete Device Initialization... Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. version 216 [ OK ] Started Update UTMP about System Boot/Shutdown. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. [FAILED] Failed to start Rebuild Dynamic Linker Cache. See 'systemctl status ldconfig.service' for details. Starting Update is Completed... [ OK ] Started Update is Completed. [ 6.423096] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 [ 6.430379] s5p_mfc_load_firmware:99: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 6.441191] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 [ 6.449477] s5p_mfc_load_firmware:99: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ OK ] Reached target Sound Card. [ OK ] Started udev Wait for Complete Device Initialization. [ OK ] Started Run pending postinsts. [ OK ] Reached target System Initialization. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on dropbear.socket. [ OK ] Listening on Buxton Configuration Service. [ OK ] Listening on System server socket. [ OK ] Listening on Sensor daemon socket. [ OK ] Listening on download-provider.socket. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on security-server-data-share.socket. [ OK ] Listening on security-server-get-gid.socket. [ OK ] Listening on security-server-privilege-by-pid.socket. [ OK ] Listening on security-server-app-privilege-by-name.socket. [ OK ] Listening on security-server-cookie-get.socket. [ OK ] Listening on security-server-cookie-check.socket. [ OK ] Listening on security-server-password-check.socket. [ OK ] Listening on security-server-password-set.socket. [ OK ] Listening on security-server-password-reset.socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Download provider service... [ OK ] Started Download provider service. Starting Start the Access Control server... Starting Avahi mDNS/DNS-SD Stack... Starting Connection service... Starting neard service... Starting Media server... [ OK ] Started Media server. Starting net config service... Starting Start the av system... Starting D-Bus System Message Bus... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting SMACK rules loading... Starting System device daemon... [ OK ] Started System device daemon. Starting Permit User Sessions... Starting Login Service... Starting Telephony service... Starting Sensor Daemon... [ OK ] Reached target security-server sockets. Starting Start the security server... [ OK ] Started Start the security server. [ OK ] Started Sensor Daemon. [FAILED] Failed to start neard service. See 'systemctl status neard.service' for details. [FAILED] Failed to start Start the av system. See 'systemctl status avsystem.service' for details. [ OK ] Started SMACK rules loading. [ OK ] Started Permit User Sessions. [ OK ] Started Start the Access Control server. [ 14.848359] smsc95xx 3-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 14.854198] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started Telephony service. [ OK ] Started Connection service. [ OK ] Started Login Service. Starting WPA supplicant... Starting Bluetooth service... Starting Buxton Configuration Service... [ OK ] Started Buxton Configuration Service. Starting Tiny Login Manager... [ OK ] Started Tiny Login Manager. [ OK ] Started WPA supplicant. [ OK ] Started net config service. [ OK ] Started Bluetooth service. Starting Hostname Service... [ OK ] Reached target Multi-User System. [ OK ] Started Hostname Service. [ 16.721996] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.727694] smsc95xx 3-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x43E1 [ 46.821384] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.