Hello Stipe,
I'll put it down in points, yes I get the connection, but I'll explain where
the problem is.

1) connect the gsm modem to usb port
2) start bearerbox to connect to modem at 115200 (speed set in conf file)
3) bearerbox fails to connect, because after opening port at that speed, at
command fails
4) connect the modem through hyperterminal (Hilgraeve product, comes with
win 2k) at 115200
5) disconnect the modem from hyperterminal
6) reconnect with the same configuration file from bearerbox, this time
connection will succeed.

This is not sporadic behaviour.  I run through this process everytime I
connect the gsm modem.
I wanted to know if there are any workarounds for this.

Best Regards
Anu

> -----Original Message-----
> From: Stipe Tolj [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, February 11, 2003 7:33 AM
> To: Anupama R
> Cc: [EMAIL PROTECTED]
> Subject: Re: connection of bearerbox with GSM modem
> 
> 
> Anupama R wrote:
> > 
> > Hello,
> > I work with the cygwin installation of kannel on a win2k machine.
> > I have a peculiar problem with the bearerbox.
> > When I start bearerbox utility and try and connect to the 
> modem, the speed
> > in the conf file does not seem to match and the connection fails.
> > 
> > But if I try to connect to the modem thru the HyperTerminal 
> (developed by
> > Hilgraeve for microsoft)
> > to the modem with the same speed, the connection comes 
> through correctly.
> > 
> > Consequently if I try the bearerbox connection with the 
> same conf file, the
> > bearerbox is up
> > and running fine.
> > 
> > Any idea why this would happen?
> 
> so do you get a valid connection to the device or not? I didn't get
> the point, sorry.
> 
> Stipe
> 
> [EMAIL PROTECTED]
> -------------------------------------------------------------------
> Wapme Systems AG
> 
> Vogelsanger Weg 80
> 40470 Düsseldorf
> 
> Tel: +49-211-74845-0
> Fax: +49-211-74845-299
> 
> E-Mail: [EMAIL PROTECTED]
> Internet: http://www.wapme-systems.de
> -------------------------------------------------------------------
> wapme.net - wherever you are
> 

Reply via email to