George,
I have not had time to look over the 1.4.3 make check failure for
Intel 2011.6.233 compilers. Have you?
I had planned to get 1.4.3 compiled on all six of our compilers using
the latest compiler releases. I was putting off upgrading to 1.4.4 or
1.5.x until after that to minimize the number of things that could go
wrong. Do you recommend otherwise?
Larry Baker
US Geological Survey
650-329-5608
ba...@usgs.gov
On 7 Oct 2011, at 6:46 PM, George Bosilca wrote:
The may_alias attribute was part of a forward-looking attribute
checking, at a time where few compiler supported them. This explains
why they are not widely used in the library itself. Moreover, as
they do not affect the compilation itself (as your test highlights
this is not the issue with the icc 2011.6.233 compiler), there is no
urge to remove the may_alias support.
I just got that particular version of the compiler installed on one
of our machines. I'll give it a try over the weekend.
george.
On Oct 7, 2011, at 20:21 , Larry Baker wrote:
The test for the __may_alias_ attribute uses the following short
code snippet:
int * p_value __attribute__ ((__may_alias__));
int
main ()
{
;
return 0;
}
Indeed, for Intel 2011 compilers prior to 2011.6.233, this results
in a warning:
root@hydra openmpi-1.4.3]# module load compilers/intel/2011.5.220
[root@hydra openmpi-1.4.3]# icc -c may_alias_test.c
may_alias_test.c(123): warning #1292: attribute "__may_alias__"
ignored
int * p_value __attribute__ ((__may_alias__));
^
[root@hydra openmpi-1.4.3]# module unload compilers/intel/2011.5.220
[root@hydra openmpi-1.4.3]# module load compilers/intel/2011.6.233
[root@hydra openmpi-1.4.3]# icc -c may_alias_test.c
I modified ./configure to force
ompi_cv___attribute__may_alias=0
Then I compiled and tested the library. Unfortunately, the results
were exactly the same:
make check-TESTS
make[3]: Entering directory `/state/partition1/root/src/
openmpi-1.4.3/test/datatype'
/bin/sh: line 4: 26326 Segmentation fault ${dir}$tst
FAIL: checksum
/bin/sh: line 4: 26359 Segmentation fault ${dir}$tst
FAIL: position
========================================================
2 of 2 tests failed
Please report to http://www.open-mpi.org/community/help/
========================================================
I could not find any use of the may_alias attribute, other than in
a #define in opal/include/opal_config_bottom.h. Is
OMPI_HAVE_ATTRIBUTE_MAY_ALIAS just cruft that can be removed?
Larry Baker
US Geological Survey
650-329-5608
ba...@usgs.gov
On 7 Oct 2011, at 11:08 AM, Larry Baker wrote:
I ran into a problem this past week trying to upgrade our OpenMPI
1.4.3 for the latest Intel 2011 compiler, 2011.6.233.
make check fails with Segmentation Fault errors:
[root@hydra openmpi-1.4.3]# tail -20 ../openmpi-1.4.3-check-intel.
6.233.log
/bin/sh ../../libtool --tag=CC --mode=link icc -DNDEBUG -g -O3
-finline-functions -fno-strict-aliasing -restrict -pthread -
fvisibility=hidden -shared-intel -export-dynamic -shared-intel -
o ddt_pack ddt_pack.o ../../ompi/libmpi.la -lnsl -lutil
libtool: link: icc -DNDEBUG -g -O3 -finline-functions -fno-strict-
aliasing -restrict -pthread -fvisibility=hidden -shared-intel -
shared-intel -o .libs/ddt_pack ddt_pack.o -Wl,--export-
dynamic ../../ompi/.libs/libmpi.so /usr/local/src/openmpi-1.4.3/
orte/.libs/libopen-rte.so /usr/local/src/openmpi-1.4.3/opal/.libs/
libopen-pal.so -ldl -lnsl -lutil -pthread -Wl,-rpath -Wl,/usr/
local/lib
make[3]: Leaving directory `/state/partition1/root/src/
openmpi-1.4.3/test/datatype'
make check-TESTS
make[3]: Entering directory `/state/partition1/root/src/
openmpi-1.4.3/test/datatype'
/bin/sh: line 4: 6322 Segmentation fault ${dir}$tst
FAIL: checksum
/bin/sh: line 4: 6355 Segmentation fault ${dir}$tst
FAIL: position
========================================================
2 of 2 tests failed
Please report to http://www.open-mpi.org/community/help/
========================================================
make[3]: *** [check-TESTS] Error 1
make[3]: Leaving directory `/state/partition1/root/src/
openmpi-1.4.3/test/datatype'
make[2]: *** [check-am] Error 2
make[2]: Leaving directory `/state/partition1/root/src/
openmpi-1.4.3/test/datatype'
make[1]: *** [check-recursive] Error 1
make[1]: Leaving directory `/state/partition1/root/src/
openmpi-1.4.3/test'
make: *** [check-recursive] Error 1
Before trying to track down the problem, I thought I'd describe
what I see here in case someone recognizes what might be happening.
We have been using OpenMPI 1.4.3 compiled with the Intel
2011.3.174 compiler. I've updated the Intel 2011 compilers as
they have come out with new versions: 2011.4.191, 2011.5.220, and
now 2011.6.233. However, I've not recompiled OpenMPI 1.4.3 until
now.
Since the original compilation of OpenMPI 1.4.3 with the Intel
2011.3.174 compilers, I have installed libnuma and libnuma-devel
RPMs on our cluster front end. I noticed that changed the OpenMPI
1.4.3 ./configure output. To test that this was not the cause of
the problem, I recompiled OpenMPI 1.4.3 using both the CentOS/
Rocks GNU compilers and the Intel 2011.3.174 compilers. They both
passed all the make check tests.
To find out when this problem first occurs, I systematically
configured, compiled, and checked OpenMPI 1.4.3 with all four
versions of the Intel 2011 compilers we have. We use the modules
package to load the compiler environment:
[root@hydra openmpi-1.4.3]# env | grep /opt/intel
LD_LIBRARY_PATH=/opt/intel/composer_xe_2011_sp1.6.233/compiler/
lib/intel64:/opt/intel/composer_xe_2011_sp1.6.233/mkl/lib/intel64
PATH=/opt/intel/composer_xe_2011_sp1.6.233/bin/intel64:/usr/
kerberos/sbin:/usr/kerberos/bin:/usr/java/latest/bin:/usr/local/
sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/opt/eclipse:/
opt/ganglia/bin:/opt/ganglia/sbin:/opt/maui/bin:/opt/torque/bin:/
opt/torque/sbin:/opt/rocks/bin:/opt/rocks/sbin:/root/bin
Here's the steps I use to make and test OpenMPI 1.4.3 (I use a
patched version to accommodate the six compilers we have; I've
submitted those patches here in the past):
# cd /usr/local/src
# tar -xjf openmpi-1.4.3-patched.tar.bz2
# cd openmpi-1.4.3
# module load compilers/intel/2011.6.233
# ./configure >../openmpi-1.4.3-configure-intel.6.233.log 2>&1 --
with-tm --with-openib --without-valgrind --without-udapl --enable-
contrib-no-build=vt --with-wrapper-ldflags="-shared-intel"
CC="icc" CFLAGS="-g -O3" CXX="icpc" CXXFLAGS="-g -O3" FC="ifort"
FCFLAGS="-g -O3" F77="ifort" FFLAGS="-g -O3" LDFLAGS="-shared-
intel"
# make >../openmpi-1.4.3-make-intel.6.233.log 2>&1
# make check >../openmpi-1.4.3-check-intel.6.233.log 2>&1
(When I generate the OpenMPI 1.4.3 library we actually use, I also
add a --prefix. But, that complicates diff's of the stdout files
for these steps, so it is not used here. Thus, I do NOT proceed
to make install any of these libraries.)
The three earlier versions of the Intel 2011 compilers all pass
the make check tests. When I compare the ./configure stdout
files, they are all identical. However, the ./configure stdout
file for the Intel 2011.6.233 compilers has one difference:
[root@hydra openmpi-1.4.3]# diff ../openmpi-1.4.3-configure-intel.
{5.220,6.233}.log
178c178
< checking for __attribute__(may_alias)... no
---
> checking for __attribute__(may_alias)... yes
That is obviously where I will start looking for the source of the
problem.
Maybe someone reading this list knows what the purpose of that
test is, whether the Intel 2011 compilers are expected to have
this feature enabled, and whether the code this enables can cause
this problem if the Intel 2011.6.233 compilers do not fully
support whatever this test is intended to discern.
Larry Baker
US Geological Survey
650-329-5608
ba...@usgs.gov
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
