Add support to probe via devicetree.
Signed-off-by: Andre Heider <a.hei...@gmail.com>
---
drivers/uio/uio_pruss.c | 46 +++++++++++++++++++++++++++++++++++++++-------
1 file changed, 39 insertions(+), 7 deletions(-)
diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c
index afaf726..2df54ab 100644
--- a/drivers/uio/uio_pruss.c
+++ b/drivers/uio/uio_pruss.c
@@ -26,6 +26,7 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/genalloc.h>
+#include <linux/of_device.h>
#define DRV_NAME "pruss_uio"
#define DRV_VERSION "1.0"
@@ -70,6 +71,27 @@ struct uio_pruss_dev {
struct gen_pool *sram_pool;
};
+#ifdef CONFIG_OF
+struct uio_pruss_params {
+ u32 pintc_offset;
+};
+
+static const struct uio_pruss_params uio_pruss_v1_params = {
+ .pintc_offset = 0x4000,
+};
+
+static const struct uio_pruss_params uio_pruss_v2_params = {
+ .pintc_offset = 0x20000,
+};
+
+static const struct of_device_id pruss_of_match_table[] = {
+ { .compatible = "ti,pruss-v1", .data = &uio_pruss_v1_params, },
+ { .compatible = "ti,pruss-v2", .data = &uio_pruss_v2_params, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pruss_of_match_table);
+#endif
+
static irqreturn_t pruss_handler(int irq, struct uio_info *info)
{
struct uio_pruss_dev *gdev = info->priv;
@@ -111,6 +133,8 @@ static int pruss_probe(struct platform_device *pdev)
struct uio_pruss_dev *gdev;
struct resource *regs_prussio;
struct device *dev = &pdev->dev;
+ const struct of_device_id *match;
+ const struct uio_pruss_params *params;
int ret = -ENODEV, cnt = 0, i;
struct uio_pruss_pdata *pdata = dev_get_platdata(dev);
dma_addr_t ddr_paddr;
@@ -123,13 +147,21 @@ static int pruss_probe(struct platform_device *pdev)
if (!gdev->info)
return -ENOMEM;
- /* Power on PRU in case its not done as part of boot-loader */
- gdev->pruss_clk = clk_get(dev, "pruss");
- if (IS_ERR(gdev->pruss_clk)) {
- dev_err(dev, "Failed to get clock\n");
- return PTR_ERR(gdev->pruss_clk);
+ if (dev->of_node) {
+ match = of_match_device(pruss_of_match_table, dev);
+ params = match->data;
+ gdev->pintc_base = params->pintc_offset;
} else {
+ /* Power on PRU in case its not done as part of boot-loader */
+ gdev->pruss_clk = clk_get(dev, "pruss");
+ if (IS_ERR(gdev->pruss_clk)) {
+ dev_err(dev, "Failed to get clock\n");
+ return PTR_ERR(gdev->pruss_clk);
+ }
+
clk_enable(gdev->pruss_clk);
+
+ gdev->pintc_base = pdata->pintc_base;
}
regs_prussio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -139,7 +171,7 @@ static int pruss_probe(struct platform_device *pdev)
goto out_free;
}
- if (pdata->sram_pool) {
+ if (pdata && pdata->sram_pool) {
gdev->sram_pool = pdata->sram_pool;
gdev->sram_vaddr =
(unsigned long)gen_pool_dma_alloc(gdev->sram_pool,
@@ -156,7 +188,6 @@ static int pruss_probe(struct platform_device *pdev)
goto out_free;
}
- gdev->pintc_base = pdata->pintc_base;
gdev->hostirq_start = platform_get_irq(pdev, 0);
for (cnt = 0, p = gdev->info; cnt < MAX_PRUSS_EVT; cnt++, p++) {
@@ -214,6 +245,7 @@ static struct platform_driver pruss_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pruss_of_match_table),
},
};
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
