On Mon, 02 Mar 2015, Eric Anholt wrote:

> From: Lubomir Rintel <lkund...@v3.sk>
> 
> v2: Split into a separate patch for submitting to the devicetree list.

When you say that you've split them, do you mean each DT doc, as I
don't think this is the way to go.  I'm happy to listen to other
people's opinions, but I think all of the .../mailbox/brcm,bcm2835-
files should be amalgamated.

>     Consistently start node docs with a capital letter. device's
>     address in the example shouldn't have "0x". Drop machine-specific
>     interrupt numbers from the docs.  (changes by anholt).
> 
> Signed-off-by: Lubomir Rintel <lkund...@v3.sk>
> Signed-off-by: Craig McGeachie <slap...@yahoo.com.au>
> Signed-off-by: Eric Anholt <e...@anholt.net>
> ---
>  .../devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt | 19 
> +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt 
> b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
> new file mode 100644
> index 0000000..f5741a0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt

Rename these files to conform to the current naming convention.  In
-next we currently have 'altera-mailbox.txt' and 'omap-mailbox.txt',
so 'bcm2835-mbox.txt' seems appropriate.

> @@ -0,0 +1,19 @@
> +Broadcom BCM2835 VideoCore mailbox IPC
> +
> +Required properties:
> +
> +- compatible : Should be "brcm,bcm2835-mbox"
> +- reg : Specifies base physical address and size of the registers.
> +- interrupts : The interrupt number. See
> +  bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
> +- #mbox-cells : Specifies the number of cells needed to encode a
> +  mailbox channel. The value shall be 1.

Binding documents are much easier to read if the property names and
descriptions are seperated with tabs.

- compatible            : Should be "brcm,bcm2835-mbox"
- reg                   : Specifies base physical address and size of the 
registers
- interrupts            : The interrupt number
                          [See 
../interrupt-controller/brcm,bcm2835-armctrl-ic.txt]
- #mbox-cells           : Specifies the number of cells needed to encode a
                          mailbox channel. The value shall be 1

... don't you think?  Also notice the consistency of no '.'s and the
bracketing of the [See ...] statement.

> +Example:
> +
> +mailbox: mailbox@7e00b800 {
> +     compatible = "brcm,bcm2835-mbox";
> +     reg = <0x7e00b880 0x40>;
> +     interrupts = <0 1>;
> +     #mbox-cells = <1>;
> +};

It would be good to see the client examples here as well.  Please consider
pulling in brcm,bcm2835-mbox-power.txt and brcm,bcm2835-mbox-property.txt.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to