Reboot the server. When the graphical esmith boot screen shows up (that
allows you to select different kernels) hit ctrl x. That will give you a
"boot:" prompt. type: esmith single When that finishes you will have a
shell prompt. Type /sbin/chkconfig --level 1234567 ipsec off
Reboot and it should boot fine now.
Andy Worthington
----- Original Message -----
From: "Michael Jung" <[EMAIL PROTECTED]>
To: "Andy Worthington" <[EMAIL PROTECTED]>
Cc: "dev info" <[EMAIL PROTECTED]>
Sent: Monday, August 13, 2001 9:25 AM
Subject: [e-smith-devinfo] IPSec Startup Script crashes E-SmithServer
> I tried to setup an IPSec Tunnel between two E-Smith 4.1.2 Servers.
>
> I updated fist the available updates for E-Smith 4.1.2 :
> e-smith-base-4.4.0-26.noarch.rpm
> e-smith-openssh-1.2.0-11.noarch.rpm
> e-smith-pptpd-1.2.0-07.noarch.rpm
>
> Then installed with the ipsec howto at
> http://students.ou.edu/W/Christopher.A.Worthington-1/e-smith/ipsec/
>
> After that with the new webpages on the console I tried to setup the
Tunnel
> via remote ssh logon.
> I configured :
> Remote network NAT'ed: YES
> Protect Network to Network traffic: YES
> Protect Gateway to Gateway traffic: YES
> Protect Gateway to Network traffic: YES
> Local machine acts as: CLIENT
> and added the routers remote public key with cut&paste and clicked 'Add'.
>
> After that I lost my remote SSH connection, may be that was my fault
because
> of the default settings above, I thought. So I went to the system and
> rebootet it to login as admin and change the settings with lynx.
> The system went down normally but didn't start again. It stops all the
time
> at the startup sequence of IPSec.
>
> Is there a chance to get in to the system without formatting and
> reinstalling the E-Smith Server?
> Any help is welcome.
>
> Michael Jung
>
>
> --
> Please report bugs to [EMAIL PROTECTED]
> Please mail [EMAIL PROTECTED] (only) to discuss security issues
> Support for registered customers and partners to [EMAIL PROTECTED]
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
> Archives by mail and
http://www.mail-archive.com/devinfo%40lists.e-smith.org
>
--
Please report bugs to [EMAIL PROTECTED]
Please mail [EMAIL PROTECTED] (only) to discuss security issues
Support for registered customers and partners to [EMAIL PROTECTED]
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
