Hi Cyrus, As promised, I looked again to the translated code of the cbq panel. As far as I can see, everything is translated well and I did not translate more than the necessary text parts (no important code is translated which could cause the problems). So, the problems can't be related to the translation work. I guess this newer version is just somewhat different than the older one (why should Jaime use a new version number otherwise? :)).
As told earlier, an acquaintance of mine tested it on a SME 5.1.2 box and reported that it worked perfectly. To confirm this, I just installed it too and tested it myself. I also get only the first and the third (summary) screen (supposed there should be a second page of course) when I select "control by service", but it gives no error so I suppose it should work now. I can't test it, because I'm not on my local network at the moment. When I choose "control by equipment" however, I get three pages where I can specify if the IP range is controlled by DHCP or manually on the second page. So...on a 5.1.2 box it is working properly, supposed it works when it gives no errors :) I really don't have any idea why it isn't working well under SME > 5.1.2. I think you should ask this to the original contributor Jaime Nebrera Herrera. Regards, Timothée Bastin -----Oorspronkelijk bericht----- Van: Cyrus Bharda [mailto:[EMAIL PROTECTED] Verzonden: vrijdag 8 augustus 2003 6:23 Aan: E-Smith Developers List; Timothée Bastin Onderwerp: Re: [e-smith-devinfo] ANNOUNCE: QoS addon in english and french Timothée, The problem is not that all th panels are not in english, the problem is that it misses a step. In the old spanish version, 03 I think, there were 3 seperate setting pages, you setup some stuff on the first, then clicked on a button, then setup some stuff on a second page, then clicked on a button, then you got a summary page and clicked a button to accept it all. But in the english version you only get the firt and third pages, and an error after the third, and it does not work? Cyrus Bharda ----- Original Message ----- From: "Timothée Bastin" <[EMAIL PROTECTED]> To: "Cyrus Bharda" <[EMAIL PROTECTED]>; "E-Smith Developers List" <[EMAIL PROTECTED]>; "Timothée Bastin" <[EMAIL PROTECTED]> Sent: Thursday, July 31, 2003 12:40 AM Subject: Re: [e-smith-devinfo] ANNOUNCE: QoS addon in english and french : Hi Cyrus, : : I'm back from my holiday trip and I just relooked at the translated cbq : panel. As far as I know, it is only necessary to translate one file. : The only spanish text I can find is some commented text, so all panels : should be in English. : : I really have no clue why some of the panels aren't in English. Maybe : you can specify some further what the "problem" is...so what panel is : in English and what is in Spanish and maybe what errors you get. : : TIA, : : Timothée Bastin : : > Cool, : > : > That's alright, been waiting for this so another couple of weeks wont : bother : > me :-) : > : > FYI I am using 5.5u6, : > : > Thanks, : > : > Cyrus Bharda : > : > Timothée Bastin wrote: : > : Hi Cyrus, : > : : > : I translated the eneo qos rpm to english and I really translated : every : > : part of the file(s) :) I did not test it yet, but a friend of mine : did : > : on a 5.1.2 server and it worked well for him! I don't use the french : > : one because I can't read french so I don't know if that version : gives : > : the same error. : > : : > : Maybe it has something to do with the SME version you use? As I'm : > : going on a holiday trip this week, I can't promise that I'll look at : > : it but when I have some spare minutes I'll try to confirm that I : > : really translated everything! : > : : > : Regards, : > : : > : Timothée Bastin : > : : > :: Same with English version, it skips the middle section, the part : > :: where you specify what speed you want to limit to, at least I get 3 : > :: configuration screens using the spanish, but only 2 with the : english : > :: and error when trying to save it, have not tried french version but : > :: it sounds the same. : > :: : > :: Maybe this thread belongs on the forums, or is this a development : > :: issue, the rpm is a beta.......?? : > :: : > :: Cyrus Bharda : > :: : > :: Laurent DINCLAUX wrote: : > ::: Hello, : > ::: : > ::: : > :::: We have just released the last beta version of eneo-qos. This : > :::: time its in english and french too besides spanish. Yes I know, : the : > :::: language is hardcoded but we have no time to catch up with SME : > :::: releases. Now that official SME is in spanish ... :) : > ::: : > ::: Using the french rpm, I have a message when i try to save : > ::: changes: : > ::: : > ::: Software error: : > ::: Erreur lors de l'actualisation de la configuration de la QoS. : > ::: : > ::: For help, please send mail to the webmaster ([EMAIL PROTECTED]), : > ::: giving this error message and the time and date of the error. : > ::: : > ::: : > ::: I use SME5.6U4 : > ::: : > ::: -- : > ::: Regards : > ::: Laurent : > :: : > :: : > :: -- : > :: Please report bugs to [EMAIL PROTECTED] : > :: Please mail [EMAIL PROTECTED] (only) to discuss security issues : > :: Support for registered customers and partners to : [EMAIL PROTECTED] : > :: To unsubscribe, e-mail: [EMAIL PROTECTED] : > :: For additional commands, e-mail: [EMAIL PROTECTED] : > :: Searchable archive at http://www.mail-archive.com/devinfo% : 40lists.e- : > :: smith.org : > : > : > : : : -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org
