On Sun, Nov 17, 2002 at 09:38:45PM +0000, Roger Hayter wrote: <> > I find that surprising. I am not sure what you mean by "sending about > 300 pieces of data per hour". My node deals with about 150 to 300 > queries per hour in terms of "incoming queries that are not rejected". > Or do you only include queries which were successful? Or only ones > where the data was on your node (I don't know how to find this)? "Number > of times data was sent" is less impressive at 6 to 30 times per hour - > is this the parameter you were referring to? But my node runs on a 70MHz > pentium, uses 12-16MB of RAM, and has an outbound bandwidth of 2.5kb/s > (I assume the bandwidth limits are kb/s not kByte/s!). This is build > 534, which seems remarkably more efficient than most, apart from > occasionally losing all its node references.
I was referring to the sentData field, yes. That shows the number of times that data was sent from the node (either when transfering or an insert or data request, or when data was found on it). The number hovers between 300 and 500 per hour here. That is for about 8000 accepted queries - about 96% of the queries my node sees fail (I have no idea where they all come from, but I understand there is some software that floods the network). As for you 300 qph is nothing. I would start wondering about the load balancing, but I'm surprised that freenet even runs on 70 mhz, so... -- Oskar Sandberg [EMAIL PROTECTED] _______________________________________________ devl mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/devl