RC1, master seems to work. Ralph.
-----Original Message----- From: Martin Braun [mailto:martin.br...@ettus.com] Sent: Wednesday, April 15, 2015 15:44 To: Ralph A. Schmid, dk5ras; usrp-us...@lists.ettus.com; 'GNU Radio Discussion List' Subject: Re: [Discuss-gnuradio] New UHD seems to break a lot... Thanks, Ralph. Just to clarify: When you say 'New UHD', do you mean 3.8.3-RC1, or latest master? Martin On 15.04.2015 08:40, Ralph A. Schmid, dk5ras wrote: > It is a B210, but as a note, due to the up to now missing FPGA images > I used 003.008.003-RC1, not the latest master. Still I had no access > to a spectrum and DVB-T analyzer, so I have no idea what is happening, > I just can confirm that RF is transmitted, and the receiver doesn't > get a picture, while with the snapshot of the same VM before the upgrade is received without problems. > I will know more in about three hours. > > Ralph. > >> -----Original Message----- >> From: Martin Braun [mailto:martin.br...@ettus.com] >> Sent: Wednesday, April 15, 2015 3:15 PM >> To: Ralph A. Schmid, dk5ras; usrp-us...@lists.ettus.com; 'GNU Radio >> Discussion List' >> Subject: Re: [Discuss-gnuradio] New UHD seems to break a lot... >> >> On 15.04.2015 06:20, Ralph A. Schmid, dk5ras wrote: >>> Hi, >>> >>> Not only OpenBTS is affected, also gr-dvbt/t2 do not work any more >>> with latest uhd. A quick check during lunch break showed, the >>> produced output is not decodable any more. I will take a closer look >>> this evening at home, where I have more and better equipment. >> >> Ralph, >> >> which device is this on? >> >> Thanks, >> Martin > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio