Hi, I wonder if anyone has a clue about this problem. I'm sure I've run the same thing before and then it worked... I can't see what changed.
This is what I run: from dolfin import * mesh = UnitSquare(2, 2) cell = Cell(mesh, 2) cell.facetArea(1) The last command gives me the error attached at the bottom of the mail, but cell.volume(), cell.midpoint() and other methods work fine. I also get the same/similar for a similar code: edge = Edge(mesh, 2) edge.length() Greatful for any help! Aron ########### ERROR MESSAGE ########## cell.facetArea(1) [ip2432:04538] *** Process received signal *** [ip2432:04538] Signal: Bus error (10) [ip2432:04538] Associated errno: Unknown error: 1019328 (1019328) [ip2432:04538] Signal code: (13) [ip2432:04538] Failing at address: 0x63617274 [ 1] [0xbfffd2f8, 0x00000004] (-P-) [ 2] (_wrap_Cell_facetArea + 0xa2) [0xbfffd328, 0x04ab0298] [ 3] (PyObject_Call:F(0,3) + 0x2d) [0xbfffd348, 0x0000a498] [ 4] (PyEval_EvalFrameEx:F(0,2) + 0x35df) [0xbfffd588, 0x0007947f] [ 5] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffd638, 0x0007c726] [ 6] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffd878, 0x00079f30] [ 7] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffd928, 0x0007c726] [ 8] (PyEval_EvalFrameEx:F(0,2) + 0x4e03) [0xbfffdb68, 0x0007aca3] [ 9] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffdc18, 0x0007c726] [10] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffde58, 0x00079f30] [11] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffdf08, 0x0007c726] [12] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffe148, 0x00079f30] [13] (PyEval_EvalFrameEx:F(0,2) + 0x5446) [0xbfffe388, 0x0007b2e6] [14] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffe438, 0x0007c726] [15] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffe678, 0x00079f30] [16] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffe728, 0x0007c726] [17] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffe968, 0x00079f30] [18] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffea18, 0x0007c726] [19] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffec58, 0x00079f30] [20] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffed08, 0x0007c726] [21] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffef48, 0x00079f30] [22] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffeff8, 0x0007c726] [23] (PyEval_EvalCode:F(0,2) + 0x57) [0xbffff038, 0x0007c8da] [24] (PyRun_FileExFlags:F(0,2) + 0x104) [0xbffff0a8, 0x0009fa6d] [25] (PyRun_SimpleFileExFlags:F(0,81) + 0x280) [0xbffff138, 0x0009fe07] [26] (Py_Main:F(0,2) + 0xc05) [0xbffff268, 0x00005896] [27] (_start + 0xd8) [0xbffff2a8, 0x00002412] [28] (start + 0x29) [0xbffff2cc, 0x00002339] [ip2432:04538] *** End of error message *** Bus error ########################################################## _______________________________________________ DOLFIN-dev mailing list DOLFIN-dev@fenics.org http://www.fenics.org/mailman/listinfo/dolfin-dev