Hi ZubairLK
On 2014年11月10日 17:17, Zubair Lutfullah Kakakhel wrote:
Nice work.

This patch should move the binding from

Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
to the location instead of making a new file and leaving the old
one in place.

And use git format-patch -M to highlight any changes.

Regards
ZubairLK
   I add these bindings for dw-hdmi core, because
  properities like reg, interrupts, ddc-i2c-bus, reg-io-width are used
  by dw-hdmi core, but properities like compatible, gpr,clk, are platform
  specific , they are handled by the platform code like dw_hdmi-imx.c
  and described in platform specific dt binds like /imx-drm/hdmi.txt
On 08/11/14 05:32, Andy Yan wrote:
Signed-off-by: Andy Yan <andy....@rock-chips.com>
---
  .../devicetree/bindings/drm/bridge/dw-hdmi.txt     | 38 ++++++++++++++++++++++
  1 file changed, 38 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt

diff --git a/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt 
b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
new file mode 100644
index 0000000..aa7ed17
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
@@ -0,0 +1,38 @@
+DesignWare HDMI bridge bindings
+
+Required properities:
+- compatibel: platform specific such as "fsl,imx6q-hdmi","fsl,imx6dl-hdmi"
+             "rockchip,rk3288-dw-hdmi"
+- reg: physical base address of the controller and length
+- ddc-i2c-bus: the ddc i2c bus
+- interrupts: The interrupt number to the cpu
+
+Optional properties
+- reg-io-width: the width of the reg:1,4, default set to 1 if not present
+
+Example:
+       hdmi: hdmi@0120000 {
+               compatible = "fsl,imx6q-hdmi";
+               reg = <0x00120000 0x9000>;
+               interrupts = <0 115 0x04>;
+               gpr = <&gpr>;
+               clocks = <&clks 123>, <&clks 124>;
+               clock-names = "iahb", "isfr";
+               ddc-i2c-bus = <&i2c2>;
+
+               port@0 {
+                       reg = <0>;
+
+                       hdmi_mux_0: endpoint {
+                               remote-endpoint = <&ipu1_di0_hdmi>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+
+                       hdmi_mux_1: endpoint {
+                               remote-endpoint = <&ipu1_di1_hdmi>;
+                       };
+               };
+       };





_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to