Romas, I thank you for your advice but it does not work for me. For some reason adding IF; causes DX4Win to delete the selection of the TS950 from the Radio1. Radio2 (the TS570S) remains the same and loses communication with the radio after a few seconds, just as it did before. 73 Andy G3SVD
-----Original Message----- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Romualdas Ulevicius Sent: 13 February 2011 15:13 To: Dx4win@Mailman. Qth. Net Subject: Re: [Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost) I have solved such problem in my DX4WIN ver.4.07 in this way: File - Databases - Radios - Kenwood 570 - Menu Values: insert in Command preamble box "IF;" , without quotation marks and save changes. "IF" is a Kenwood command "Reads status of the transceiver" 73 Romas LY3CY --- On Sun, 2/13/11, Andy P Hewitt <andyphew...@btopenworld.com> wrote: > From: Andy P Hewitt <andyphew...@btopenworld.com> > Subject: Re: [Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost) > To: "'Bill Turner'" <w4...@yahoo.com>, "Dx4win@Mailman. Qth. Net" <dx4win@mailman.qth.net> > Date: Sunday, February 13, 2011, 2:09 PM > Bill, > I also have a TS570S (bought in the US) and get the same > results, more or > less. In my case the radio control drops out after a > variable time delay, > which can be anything from 10 seconds or so to a couple of > hours. I get the > same messages as you. I am also using DX4Win 8.04 but the > same problem has > always existed with various earlier iterations of the > program. I have had > the rig for about ten years and have always used DX4W. I > also have a > TS950SDX which works FB, and when I have raised this > questions previously I > have been advised that if the prog works with one it should > work with the > other. > > > My PC is a Dell Dimension E520 desk top, running Windows XP > Home SP3, my > settings in Preferences are the same as yours, except that > I am using 4800 > baud. I have tried various speeds with any effect. I am > using a MicroHam > DB9K CAT interface with the PC. After trying to resolve > this problem without > success I decided to just live with it. I have found that > switching the 570S > off and back on again reconnects the CAT. > > If you get any replies that provide a solution I would be > very pleased to > know. > 73 > Andy > G3SVD > > > -----Original Message----- > From: dx4win-boun...@mailman.qth.net > [mailto:dx4win-boun...@mailman.qth.net] > On Behalf Of Bill Turner > Sent: 12 February 2011 15:57 > To: dx4win@mailman.qth.net > Subject: [Dx4win] DX4WIN - Kenwood TS570S Parameters > (Repost) > > I've been working on computer control for the TS-570S and > have it going for > N1MM, FLDigi, and HRD but I'm missing something for > DX4WIN. > > The CTRL indication appears on the Kenwood front panel > screen for 10 > seconds, > then disappears and I get an error message: > Radio timed out > Radio interface has been disabled > > Here is the setup: > DX4WIN 8.04 > User Level set to advanced > > Compaq Presario 1500 laptop > Using a Radio Shack Gigaware Serial to USB converter > assigned to COM10 > Windows XP, SP3 > Transceiver: Kenwood TS-570S > > Preferences: > Radio: > Kenwood 570S > Address 00 Default checked > Baud Rate 9600 Default checked > RTS checked > Kenwood without S meter (However, 570 does have an S meter > ) > COM port 10 > Poll rate (ms) 500 (5000 does not work either) > Max Tries 6 > Transverter offset 0 > Bands None > > Kenwood Transceiver Menu: > 32 Off > 33 2 > 34 6 > 35 96-1 > 36 on > 37 on > > If someone is running a similar combination, could you > compare your settings > and > see what I've missed? > Thanks, > > Bill, W4WNT > > > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html