Hi Christophe,
Thanks for your help. I am a little confused by your example. It seems that
you have combined MAC and PHY control together... Perhaps it makes sense for
your hardware... Also, any other PHY file there is has a line similar to the
following:
_eth_phy_dev ("Micrel KSZ8041", 0x00221512, ksz8041_stat)
There is no such line in your code... Neither can I find the supposedly
required stat() function declaration. I realize that the code should be
sufficient to understand what you are doing, but being more of a hardware
designer than a software guru I would appreciate some explanation.
Thanks again,
/Mikhail
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss