Just a small update I create a flash partition of size fis create -b 0x00000000 -e 0x00000000 -r 0x00000000 -l 0x003C03E8 -f 0xa8030000 -n Image
where 3C03E8 is about 1000 bytes greater than the size of the largest image in the set i am trying to flash Writing the elf file directly gives <snip> Kernel: new Image size fis load -l -b %{freememlo} -c Image lzmaInternalSize=52844 is greater LZMA_MAX_SIZE=16000. lzma_decode failed. res=1 ELF image parsering begin... Can't read ELF header ELF image parsering done... Checksum: 0xecec3601 </snip> Loading fis load -b %{freememlo} -l -c Image too long file. lzma_decode failed. res=1 Checksum: 0xc360955a And go seems to hand the serial console. version info RedBoot> version RedBoot(tm) bootstrap and debug environment [ROMRAM] Derytech release, version v2.0 - built 22:31:40, Nov 9 2010 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x80000000-0x82000000, [0x800409d0-0x80fe1000] available FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each. as again, Help would be greatly appreciated, Harish -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss