Hi Nate,

Thanks for the info. I will try this.

My Rangley platform has no onboard or offboard vga support. Com Port /
Serial console is used for display and communication.
I am booting the platform by coreboot with UEFI payload. I am trying to
install Ubuntu server OS.

When I boot into Shell, I am not seeing actually shell (graphics are not
good) and keystroke are working properly.
When I boot into EDK Setup, I am not getting proper setup page (graphics
are not good) and keystroke are not working.

When I try to boot Ubuntu Server, I am getting below error,


*"error: no suitable video mode found.Booting in blind mode"*

It seems I am missing some video/graphics settings in UEFI payload. If you
know the fix, Please provide me.

Thanks,
Dhanasekar



On Fri, Jul 13, 2018 at 7:14 AM, Desimone, Nathaniel L <
[email protected]> wrote:

> Hi Dhanasekar,
>
> There is nothing pre-built and off-the-shelf ready today. But we do have a
> generalized infrastructure for open source Intel UEFI platforms called
> MinPlatformPkg. Please see the following:
>
> https://github.com/tianocore/edk2-platforms/tree/devel-
> MinPlatform/Platform/Intel
>
> Notice that MinPlatformPkg requires a *OpenBoardPkg that supports the
> desired platform. To my knowledge no one at Intel has looked at
> implementing a RangleyOpenBoardPkg thus far. The focus has been on recently
> released platforms, Rangley is 4 years old at this point. If you are so
> inclined, you are welcome to try implementing a RangleyOpenBoardPkg. I
> would recommend using KabylakeOpenBoardPkg as a starting point.
>
> Thanks,
> Nate
>
> On 7/11/18, 8:52 PM, "edk2-devel on behalf of Dhanasekar Jaganathan" <
> [email protected] on behalf of [email protected]>
> wrote:
>
>     Hi,
>
>     I have booted Intel Rangley / MohonPeak platform in coreboot with Intel
>     FSP.
>     I am unable to install UEFI OS in coreboot (sometime).
>
>     EDK bios will install both UEFI and Legacy OS.
>     Does Open EDK supports Intel Rangley platform?.
>     Is code base available for Intel Rangely platform?
>
>
>
>     Thanks,
>     Dhanasekar
>     _______________________________________________
>     edk2-devel mailing list
>     [email protected]
>     https://lists.01.org/mailman/listinfo/edk2-devel
>
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
edk2-buildtools-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-buildtools-devel

Reply via email to