Dave,
A little more information please.
Disconnect the KAT100 and connect the KPA100 into a dummy load - put an
external wattmeter between the KPA100 and the dummy load. Set the K2
power at 50 watts.
Then do a TUNE - what is the power read on the external wattmeter.
If my guess is correct, it will be in excess of 100 watts which means
diodes D16 and D17 in the KPA100 have been damaged and you have no power
level control.
If the K2/KPA100 power control is working properly, the power level in
TUNE will be close to 20 watts.
Regardless of whether the KAT100 has a problem or not, please make this
check just to be certain the K2 and the KPA100 are working OK.
73,
Don W3FPR
On 10/1/2013 10:22 AM, Dave Pomeroy wrote:
I just purchased a K2/100 with ant tuner. The tuner won't tune above
10 watts. Works great when power is turned down to 10 watts or less.
Anyone with an idea?
Dave
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html