Ken,
I am not sure what you mean by "#1" and "#8" - I can guess, but I don't
have enough information to know what you mean.
Look at the XVn menu items in the K3S manual listing of the menu
functions. There are two that will affect the selection of the proper
transverter - 1) XVn ON, and 2) XVn ADR. Be certain both are set
correctly for each transverter.
What I am saying is that even though you may call the external
transverter #8, it is the XVn ADR that does the selection of the
transverter - note that the band selection (address) information must be
set to match the addressing of that decoded by the transverter.
73,
Don W3FPR
On 8/22/2016 11:35 AM, Ken Arck wrote:
I've been using an external xvtr with my K3s for a while now and over
the weekend, I installed the internal K144XV one. The internal is set
as #1 and the external is set as #8 (the external has always been
defined as #8).
Now I notice that CAT control (to change the freq) calls #1 and not #8
as I want. Is it a matter of the "first one in line" - based on
frequency - is the one called or can I change something in CONFIG to
select which xvtr is set?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com