EN61236: "Saddles, pole clamps (stick clamps) and accessories for live working"
> ---------- > From: eric.lif...@natinst.com[SMTP:eric.lif...@natinst.com] > Sent: Wednesday, April 01, 1998 11:17 AM > To: emc-p...@majordomo.ieee.org > Subject: RE: EN 61236-1 or EN 61326-1 ? ? ? > > If we're talking about EN 61326-1:1997 (not EN 61236) then I have not > seen > any confirmation that it has been published in the OJ, but I'd be > happy to > hear that it is. (Well - as happy as I could be given I already have > too > much testing to do.) > > BS EN 61326-1:1997 was published by BSI on 15 November 1997, and says > it > was approved by CENELEC on 11 March 1997. I suppose that, if the > Commission was in the right mood, they could have published it in the > OJ > about a month later. My understanding is that it takes six to nine > months > to go from EN to OJ. > > If a standard called EN 61236 does exist, what is it? What is it for? > > Regards, > Eric Lifsey > National Instruments > > > > > > "WOODS, RICHARD" <wo...@sensormatic.com> on 03/31/98 01:41:02 PM > > Please respond to "WOODS, RICHARD" <wo...@sensormatic.com> > > To: "'emc-pstc'" <emc-p...@majordomo.ieee.org>, "'CTL'" > <c...@prodigy.net> > cc: (bcc: Eric Lifsey/AUS/NIC) > Subject: RE: EN 61236-1 > > > > Content-type: text/plain; charset=iso-8859-1 > Content-transfer-encoding: quoted-printable > > > > EN 61236 (no dash number) was published in the OJ on 1997-04-22. There > is no mention of the -1 standard. You can find the standards that have > been published as of the end of 1997 at www2.echo.lu. > > ---------- > > From: CTL[SMTP:c...@prodigy.net] > > Sent: Monday, March 30, 1998 4:05 PM > > To: 'emc-pstc' > > Subject: EN 61236-1 > > > > Does anyone know the status of EN 61236-1.=A0 I don't think it is > > published in the O.J. at this time and if not then a manufacturer > > cannot self-declare to it. > > > > Pryor McGinnis > > c...@prodigy.net <mailto:c...@prodigy.net> > > > > > > > > > = > >