Jack, We also make large products and I insist on ESD testing every place an operator or maintainer can get to. I test in 2kV increments to 16 kV. There are even times when I will go beyond that, like testing the media path (we move polyester film around) to see what happens or to solve specific problems. Tedious, maybe. But cost effective in the long run.
Scott s_doug...@ecrm.com -----Original Message----- From: jack.c...@cax.usa.xerox.com [SMTP:jack.c...@cax.usa.xerox.com] Sent: Friday, August 13, 1999 4:54 PM To: gra...@louisville.stortek.com Cc: emc-p...@majordomo.ieee.org; jack.c...@cax.usa.xerox.com Subject: RE: Question on internal ESD testing Charles, This is a contentious subject for us due to the time it takes to thoroughly test a large product, so I'd be interested in hearing other's opinions and practices. A scenario where ESD can cause a genuine problem (in our business) is when someone walks across a room to add paper to a printer tray. In some machines, the unit will be in standby mode. In others, it may continue printing from a different tray or cabinet. In either case, a discharge to the internal metal parts of the paper tray could conceivably cause problems we would consider failures (and have). Jack Cook EMC Engineer, Xerox Corp. jack.c...@cax.usa.xerox.com (310)333-5214 -----Original Message----- From: Grasso, Charles (Chaz) [mailto:gra...@louisville.stortek.com] Sent: Friday, August 13, 1999 9:35 AM To: 'EMC Group' Subject: Question on internal ESD testing Hello, Does anyone in this august group apply ESD discharges INTERNAL to a product as required by EN55024. I consider this just a tad egregious - don't you? Thank you Charles Grasso Advisory Engineer StorageTek 2270Sth 88th Street Louisville CO 80027 M/S 4247. Tel:303-673-2908 Fax:303-661-7115 email:gra...@louisville.stortek.com Web Site: http://www.ewh.ieee.org/r5/denver/rockymountainemc/ --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).
