http://fjallfoss.fcc.gov/oetcf/kdb/form /FTSSearchResultPage.cfm?id=27980&switch=P
Also see 47CFR15.19(a) http://edocket.access.gpo.gov/cfr_2009/octqtr/47cfr15.19.htm RSS-Gen describes the situation for IC. The lab/TCB reviewing your submittal should also be able to assist you more specifically. Adam Rudd EMC Engineer NCR Corporation phone: 770.495.2825 [email protected] | www.ncr.com -----Original Message----- From: Gartman, Richard [mailto:[email protected]] Sent: Monday, January 17, 2011 2:44 PM To: [email protected] Subject: [PSES] FCC and IC Grantee Code marking Our engineering group has developed a small 802.11 b/g client (just a little bigger than a blue tooth head set. It is an external plug-in device allowing another product to be Wi-Fi accessible). Since there is not a lot of surface area on the product, can the FCC and IC markings be left off the product and only placed in the manual? If it has to be on the product what is the minimum size of the lettering? Thank you for your opinions. W. Richard Gartman, MS, CSP Product Stewardship Manager Texas Instruments, Education Technology 7800 Banner Drive, Dallas, Tx 75251 Office: 972-917-1636 Email: [email protected] Fax: 972-917-0668 URL: www.education.ti.com www.education.ti.com/us/productstewardship - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
