Good afternoon, 

I have a client that is moving from 5.5 to 2003. Their 5.5 box had been
set for LDAP to run on port 390, all was well.

However when I load 2003 on a new member server and run everything
through, the new 2003 box can't connect and move mailboxes from the 5.5
box. ADC says that everything is OK. But the icon for the 5.5 box is
greyed out.

I went back and set the 5.5 box to use port 389 for LDAP but the 2003 box
can only see it if I tell it to look at port 390. I have run 'admin /r'
and verified that LDAP is on 389 but the new box only sees it if I tell
ADC to look on port 390. Is this my problem or should I be looking
somewhere else?

Thanks,
Robert

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Web Interface: 
http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

To unsubscribe via postal mail, please contact us at:
Jupitermedia Corp.
Attn: Discussion List Management
475 Park Avenue South
New York, NY 10016

Please include the email address which you have been contacted with.

Reply via email to