RE: Software firewall/proxy for Windows NT

[Vincent de Lau]

Title: RE: Software firewall/proxy for Windows NT

That is not good enough, because I need to be able to have different policies for trainers and trainee's. I have done it for multihomed web and mail servers (extra security behind firewall). You can then allow specific traffic on the public NIC and do maint on the other (also NT authentication, WINS etc.).

 

Vincent

-----Original Message-----
From: Claussen, Ken [mailto:[EMAIL PROTECTED]]
Sent: dinsdag 15 augustus 2000 13:54
To: 'Vincent de Lau'
Subject: RE: Software firewall/proxy for Windows NT

Have you tried setting up packet filters in the network control properties.  I have never done this but it would seem to fit your needs.  It is under the advanced tabe, under security. HTH

Ken Claussen MCSE CCNA CCA

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Vincent de Lau
Sent: Tuesday, August 15, 2000 6:30 AM
To: 'dave'; [EMAIL PROTECTED]
Cc: Gert de Heul
Subject: RE: Software firewall/proxy for Windows NT

Linux is not (yet) an option. I tried using Proxy, but I wasn't able to do it. (I'm not a Proxy expert) Maybe someone knows a good place with information on how to do it?

Thanks,

Vincent de Lau
 System Administrator / MSCE

 Tridion (http://www.tridion.com)
 mailto:[EMAIL PROTECTED]

-----Original Message-----
From: dave [mailto:[EMAIL PROTECTED]]
Sent: dinsdag 15 augustus 2000 12:25
To: Vincent de Lau
Cc: [EMAIL PROTECTED]
Subject: Re: Software firewall/proxy for Windows NT

Of course there is a FREE soluition to this,

Linux/*BSD running Squid, and you can manually build the permission areas
for site access etc, use ipchains/ipf to filter/block traffic etc.

although for NT the only product that springs to mind is MS-Proxy Server
which is not free and not cheap (in comparison to the above).

regards,
Dave.

On Tue, 15 Aug 2000, Vincent de Lau wrote:

> I need to block some traffic from our trainingroom to the rest of the
> office. I already build a multihomed NT box (PDC/DNS/WINS/DHCP) and routing
> is OK. Now I need to install some software that only permits the trainees to
> browse (specific parts of) the internet internet (http/ftp) and the trainers
> to do maintenance on the NT servers from/to both sides of the
> router/firewall.
>
> Any free/cheap solutions for this?
>
> Thanks,
>
>
> Vincent de Lau
>  System Administrator / MSCE (No, IIS and Proxy are not included! ;) Only
> Exchange and TCP/IP )
>
>  Tridion (http://www.tridion.com)
>  mailto:[EMAIL PROTECTED]
>

 +-----------------------------+
| Dave Ryan                     |
| Default Security              |
| http://www.default.org.uk     |
 +-----------------------------+