The center frequency calculation for the 60m channels takes into account
your pitch frequency. It is part of the new Channel Mode of operation
for PowerSDR.
Tim Ellison
On 3/5/2012 10:05 AM, Ed Wilson wrote:
The new FCC R&O now allows CW on 60 meters at the center frequencies of the five channels
(ARRL recommendation). For example, Channel 5 has a center frequency of 5.405 KHz (1.5 KHz
above the suppressed carrier frequency of 5.403.5 KHz). The new PowerSDR 2.3.5 update shows
5.405 KHz when Channel 5 is selected and the CWU mode is selected. If I use a "Pitch
Frequency" of 600 Hz, do I need to adjust the center frequency, or is the 600 Hz taken
into account in the frequency display?
In other words, can I just select a channel, CWU, with 600 Hz pitch and be
confident that I am transmitting at the center of the selected channel?
Thanks,
Ed, K0KC
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
