I was told to grab tha CVS snapshot for the EAP-PEAP functionality to work with my 802.1x WIN XP - Aironet 350. I must not have completely copied the files. I am getting this segment Fault when the Access point send the EAP request, and radiusd just dies.
How do I properly install the CVS files? I installed 0.9.3 with ./configre --localstaedire=/var --sysconfdir=/etc Then make && make install. got 02152004 snapshot and ran configure with same options. then copied share/* to /usr/local/share/freeradius and raddb/* to /etc/raddb What am I missing? Module: Instantiated radutmp (radutmp) Listening on IP address *, ports 1812/udp and 1813/udp. Ready to process requests. rad_recv: Access-Request packet from host 176.26.23.146:2732, id=166, length=155 User-Name = "jstevens" Cisco-AVPair = "ssid=SISLINK_NET" NAS-IP-Address = 176.26.23.146 Called-Station-Id = "00409645d552" Calling-Station-Id = "00028a1e9992" NAS-Identifier = "aplock01" NAS-Port = 37 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Service-Type = Login-User EAP-Message = 0x020b000d016a73746576656e73 Message-Authenticator = 0xa633de31dd5271dbab1eb6b4f30e6eda modcall: entering group authorize for request 0 Segmentation fault <br><br>- This message including any attachments contains privileged and confidential information intended for the use of the addressee. If you are not the intended recipient, you should delete this message (and its attachments) immediately and are hereby notified that any dissemination of this communication is strictly prohibited. <br>www.sislink.net "Come Join Us!" - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html