that will get difficult.. the accounting-start is always sent AFTER the successful authentication occured. this also makes quite sense ;) now it depends what you try to auth against freeradius (NAS,webserver,Wlan with EAP etc.). there might be a solution to achieve what you want, as nearly everything is possible (although not everything technically possible makes sense) but some more details would be needed.
Michael -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Niall McConomy Sent: Tuesday, May 04, 2004 10:45 AM To: [EMAIL PROTECTED] Subject: freeradius blocking until an ACK is received Hi, I have a quick question about the capability of Freeradius before I investigate its use any further. I am looking for a radius server that will block creating a data session until it receives an ACK to the radius accounting start message that it has sent. Is this possible to set up with freeradius - and if so then how hard would it be to do? I would need it to behave like this for a test I need to setup. Thanks in advance, Niall. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html