On Mon, Jul 19, 2004 at 08:05:28PM -0500, Robert Banniza wrote: > I'm trying to set the Cli-Initial-Access-Level on a Juniper E-Series. > However, the Juniper is not understanding:
> radiusReplyItem: ERX-Cli-Initial-Access-Level := "5" > With that said, I have looked at > http://www.juniper.net/techpubs/software/erx/erx50x/swconfig-broadband/html/radius-attributes.html > and they state that the attribute is Juniper-Initial-CLI-Access-Level > which is not being picked up either. I therefore tried > Unisphere-Init-CLI-Access-Level which was not found as well. No matter > which of these attributes I try, the initial login is always set to a > privilege level of 10. However, I also have: > radiusReplyItem: ERX-Alternate-Cli-Access-Level := "15" > This attribute is found and works accordingly after logging in and > issuing a 'enable 15'. > Anyone have any ideas as to what the attribute name should be called for > the Initial CLI Access Level? I have been stumped on this for two weeks > now and have googled and searched everything. Looking at that webpage, VSA 18 is the one you want. "Juniper-Initial-CLI-Access-Level" In FreeRADIUS's dictionary.ERX, that's "ERX-Cli-Initial-Access-Level" So in short, that should work fine. >_< Raise it with your vendor? -- Paul "TBBle" Hampson, on an alternate email client. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html