It works fine. Thanks to all. J.M.
Dmitry Lebkov wrote:
Juan Manuel Garcia Carral ÐÐÑÐÑ: [skip]
I read the mail archive and found similar problems in threads:
"about duplicated attribute in freeradius" "Multiple cisco-avpair entries"
where is referenced the use of += operator, which works fine if you are adding the VSA attributes from the user files, but I am using the LDAP server.
Can you help me ?
Here is part of user's config from LDAP:
radiusReplyItem: cisco-avpair += "lcp:interface-config=ip vrf forwarding rmt"
radiusReplyItem: cisco-avpair += "lcp:interface-config=ip unnumbered FastEthernet0/3.209"
radiusReplyItem: cisco-avpair += "ipcp:interface-config=ppp ipcp dns 192.168.1.254 192.168.2.254"
Working as expected ... ;)
-- WBR, Dmitry Lebkov
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- ___________________________ Ing. Juan Manuel GarcÃa Carral IntermediaSP
Intermedia Comunicaciones S.A.
Suipacha 128 - Bloque 2 Piso 2
C1008AAD Buenos Aires - Argentina
Tel.: (+54 11) 5032 9999
www.intermediasp.com
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html