Hi,I have Freeradius running where wireless users authenticate using EAP/TLS. Now, I would like to use the same server to authenticate wired users using EAP/MD5 on Cisco switch 3750 but it doesn't work. The log shows it doesn't do EAP authentication as shown below. Attached is my eap.conf.
Please help.
rad_recv: Access-Request packet from host 10.2.10.105:1812, id=6, length=98 NAS-IP-Address = 10.2.10.105 NAS-Port-Type = Async User-Name = "jeff" Service-Type = Framed-User Framed-MTU = 1500 Calling-Station-Id = "00-02-3f-09-9c-85" EAP-Message = 0x02010009016a656666 Message-Authenticator = 0xe96f3ad76059ff4bd380744026f8446e Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "jeff", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 1 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry jeff at line 6 modcall[authorize]: module "files" returns ok for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type Local auth: type Local auth: No User-Password or CHAP-Password attribute in the request auth: Failed to validate the user.
eap.conf
Description: Binary data
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html