What I mean is the following: I have a patton RAS, when a dial up user connects to this server, he should get a faked IP and he will be redirected to a site where he should enter all the necessary information. First of all, I have configured the FreeRadius and it's working great with this RAS, but the pool of Ips that the dial up user is configured on the Patton RAS, where only one pool can be configured, and this RAS doens not support DHCP in it. So I have to configure a DHCP server and bind it to the FreeRadius in a manner that when the user dials in to the RAS for the first time, he will be using a common username and password (user: guest pass: guest for example), he will get a fake IP from a pool configured on the DHCP server.
Once he enteres all the necessary informations, he will reconnect using the desired authentication entered previousely, and he will get a real IP from another pool also configured on the DHCP. What I want to do is to bind the freeradius and the DHCP server so this process takes place. Thanks in advance Elie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Phil Mayers Sent: Tuesday, July 25, 2006 10:27 AM To: FreeRadius users mailing list Subject: Re: Binding FreeRadius to the DHCP Server Elie Hani wrote: > Hi; > > > > I want to bind the FreeRadius to the DHCP, is there a way to do that? What do you mean? Do you mean - I want FreeRadius to assign IPs, and DHCP to hand them out? In which case, no there is no way to do that. You could *make* something that did it, e.g. using ISC DHCPd and their omapi, but you would have to make it. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html