On Fri, 2007-11-09 at 21:58 +0100, [EMAIL PROTECTED] wrote: > VLAN 2u not 2 has been assigned. Check node entry.
Ivan. Thanks. I have corected it, but no luck yet. Someone else has suggested to use a different tunnel-medium-type: Tunnel-Medium-Type = IEEE-802. I checking this lead now. Thanks, Philippe > > Ivan Kalik > Kalik Informatika ISP > > Dana 9/11/2007, "Philippe Breton" <[EMAIL PROTECTED]> piše: > > >HI, > > > >Has anyone successfully implemented auto-vlan with 3Com switch 4500G? > > > >I am using the following tunneling attributes: > > > >ATTRIBUTE Tunnel-Type 64 integer has_tag > >ATTRIBUTE Tunnel-Medium-Type 65 integer has_tag > >ATTRIBUTE Tunnel-Private-Group-Id 81 string has_tag > >VALUE Tunnel-Type VLAN 13 > >VALUE Tunnel-Medium-Type TMT802 6 > > > >The node is declared as followed: > > > >##IT Dell Inspiron 4000 laptop -- DHCP > >00-09-5b-61-52-0d Auth-Type := Local, User-Password == "00-09-5b-61-52-0d" > > Tunnel-Medium-Type = TMT802, > > Tunnel-Private-Group-id = 2, > > Tunnel-Type = VLAN, > > > >Although my radius access request shows that the access has been granted > >and the VLAN 2 assigned, the switch 4500G does not open its port on VLAN 2. > > > >I changed the tunnel-medium-type between TMT802 and 802, but that did > >not change anything. > > > >I am currently doing auto-vlan with 3com 4400 with the same > >configuration and it is working like a charm. Any idea why the switch > >does automatically adjust? > > > >Any beginning of information is welcome. > > > >Thanks, > > > >Philippe > > > > > >_RADIUS ACCESS_REQUEST LOG_ > >rad_recv: Access-Request packet from host 172.20.181.201:1024, id=41, > >length=126 > > User-Name = "00-09-5b-61-52-0d" > > User-Password = "00-09-5b-61-52-0d" > > NAS-IP-Address = 172.20.181.201 > > NAS-Identifier = "4500G" > > NAS-Port = 16809985 > > NAS-Port-Type = Ethernet > > Service-Type = Framed-User > > Framed-Protocol = PPP > > Calling-Station-Id = "0009-5b61-520d" > > Processing the authorize section of radiusd.conf > >modcall: entering group authorize for request 0 > > modcall[authorize]: module "preprocess" returns ok for request 0 > > modcall[authorize]: module "chap" returns noop for request 0 > > modcall[authorize]: module "mschap" returns noop for request 0 > > rlm_realm: No '@' in User-Name = "00-09-5b-61-52-0d", looking up > >realm NULL > > rlm_realm: No such realm "NULL" > > modcall[authorize]: module "suffix" returns noop for request 0 > > rlm_eap: No EAP-Message, not doing EAP > > modcall[authorize]: module "eap" returns noop for request 0 > > users: Matched entry 00-09-5b-61-52-0d at line 2 > > modcall[authorize]: module "files" returns ok for request 0 > >modcall: leaving group authorize (returns ok) for request 0 > > rad_check_password: Found Auth-Type Local > >auth: type Local > >auth: user supplied User-Password matches local User-Password > >Login OK: [00-09-5b-61-52-0d] (from client switch201 port 16809985 cli > >0009-5b61-520d) > >Sending Access-Accept of id 41 to 172.20.181.201 port 1024 > > Tunnel-Medium-Type:0 = TMT802 > > Tunnel-Private-Group-Id:0 = "2u" > > Tunnel-Type:0 = VLAN > >Finished request 0 > > > > > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html