after replacing the rlm_acct_unique.c my debug tells : rad_recv: Accounting-Request packet from host 192.168.2.225 port 1025, id=94, length=137 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 48 NAS-Port-Type = Ethernet User-Name = "user" Calling-Station-Id = "00:D0:59:D9:13:61" Called-Station-Id = "service1" NAS-Port-Id = "ether3" Acct-Session-Id = "81000000" Framed-IP-Address = 10.254.254.254 Acct-Authentic = RADIUS Acct-Status-Type = Start NAS-Identifier = "MikroTik" NAS-IP-Address = 192.168.2.225 Acct-Delay-Time = 0 +- entering group preacct ++[preprocess] returns ok rlm_acct_unique: Hashing 'NAS-Port = 48,Client-IP-Address <INVALID-TOKEN> 192.168.2.225,NAS-IP-Address = 192.168.2.225,Acct-Session-Id = "81000000",User-Name = "user"'
now it says "INVALID-TOKEN". should i replace only that file or are other files ( maybe entire package ) to be replaced ?! thanx On 12/01/2008, Alan DeKok <[EMAIL PROTECTED]> wrote: > > orion wrote: > > hi to all. > > im using FR 2.0.0 with default config. > > in debug mode i get > > > > *rlm_acct_unique*: *WARNING*: *Attribute* *Client *-*IP*-*Address* was > > not found in > > request, unique ID MAY be inconsistent > > Good point. The way that attribute is handled was changed in 2.0. > > I've committed a fix that should enable your existing configuration to > work in 2.0. You can grab CVS head, and replace the rlm_acct_unique.c > file in 2.0.0 with the version from CVS. Re-build, re-install, and it > should now work. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html