I'm not sure we use the users file (I have the radius.conf pointed to sql.conf).
This is what I thought might have to happen but I'm not sure if it makes sense. Create 2 Groups in radgroupreply like this: Telco_LAC_Group - with all the tunnel attributes LNS_Group - which all the users would be assigned to and whatever attributes they need to share. In "radgroupcheck" enter a NAS-IP-Address check for the Telco_LAC_Group that matches on the LAC's IPs. In "usergroup" assign the user to the LNS_Group Everything else remains the same as before (radreply and radcheck with the specific user info) Does that make sense? Any other way to group attributes for specific NASes? Adrian -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ivan Kalik Sent: Sunday, February 24, 2008 3:57 PM To: FreeRadius users mailing list Subject: RE: NAS-Group? - different replies to different NASes? You would normally use a DEFAULT entry in users file. In 2.0 you can use unlang and do it in sql. Ivan Kalik Kalik Informatika ISP Dana 24/2/2008, "Adrian" <[EMAIL PROTECTED]> piše: >Hello Ivan, > >Can you point me in the right direction with doing separate requests based >on the NAS-IP-Address Attribute? Do I do this in the radius.conf file or in >the mysql DB somehow under the groups? > >Currently I use the nas list from the flat file and the DB for everything >else including groups. > >Thanks >Adrian > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On >Behalf Of Ivan Kalik >Sent: Friday, February 22, 2008 10:22 AM >To: FreeRadius users mailing list >Subject: RE: NAS-Group? - different replies to different NASes? > >NAS-IP-Address should be different in LAC and LNS requests. And unlang >works in version 2.0 not 1.1.x (later post). > >Ivan Kalik >Kalik Informatika ISP > > >Dana 22/2/2008, "Adrian" <[EMAIL PROTECTED]> piše: > >>Hello Ivan, >> >>The Telco wants me to send those parameters to them. I have no choice in >>that. I'm confused because with every other Telco the setup was straight >>forward, I setup a tunnel/vpnd-group+virtual template from our LNS to the >>Telco's LAC and the requests for the user authentication comes from their >>LAC through my LNS all the time. With this Telco, I see the same request >>twice. Once from their Radius and then from my LNS. The problem is >>distinguishing between them and answering differently. >> >>Maybe I don't even have to do that, is just that I'm not sure how to do it >>otherwise. >> >>For now I'll do some reading on "unlang" as per Alan's request and see how >>that goes. >> >>Thanks >>Adrian >> >>-----Original Message----- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On >>Behalf Of Ivan Kalik >>Sent: Friday, February 22, 2008 6:32 AM >>To: FreeRadius users mailing list >>Subject: RE: NAS-Group? - different replies to different NASes? >> >>>4. Our radius sends the Tunnel information back to Telco Radius >> >>Why? It will be the same every time for every user. Configure tunnel >>parametars on the (virtual) interface. >> >>Ivan Kalik >>Kalik Informatika ISP >> >>- >>List info/subscribe/unsubscribe? See >>http://www.freeradius.org/list/users.html >> >>- >>List info/subscribe/unsubscribe? See >http://www.freeradius.org/list/users.html >> >> > >- >List info/subscribe/unsubscribe? See >http://www.freeradius.org/list/users.html > > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html