You can build a new version of freeradius under cygwin if you know how to. Or wait until people from freeradius.net do that for you.
Ivan Kalik Kalik Informatika ISP Dana 25/9/2008, "Jelena Žagar" <[EMAIL PROTECTED]> piše: >Yes, all parameters except allow_codechange and allow_idchange are >recognised. >What to do? > >Sincerelly, >Žagar Jelena > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] >On Behalf Of [EMAIL PROTECTED] >Sent: Thursday, September 25, 2008 1:59 PM >To: FreeRadius users mailing list >Subject: Re: Jradius con file! > >It's not very likely that allow_codechange was supported in that freeradius >version then. If you change number of connections - that does change? > >Ivan Kalik >Kalik Informatika ISP > > >Dana 25/9/2008, "Jelena Žagar" <[EMAIL PROTECTED]> piše: > >>I add the allow_codechange in jradius module in radiusd.conf file as >>you can >>see: >> # configure the rlm_jradius module >> jradius { >> name = "example" # The "Requester" name (a single >> # JRadius server can have >> # multiple "applications") >> primary = "localhost" # Uses default port 1814 >> secondary = "localhost" # Fail-over server >> tertiary = "localhost" # Fail-over server on port 8002 >> timeout = 1 # Connect Timeout >> onfail = NOOP # What to do if no JRadius >> # Server is found. Options are: >> # FAIL (default), OK, REJECT, >NOOP >> keepalive = yes # Keep connections to JRadius >>pooled >> connections = 8 # Number of pooled JRadius >>connections >> allow_codechange = yes >> } >> >>But, when I started FreeRAdius on the console output, you can see that >>the allow_codechange is not read at all: >> >>Module: Library search path is ../lib >>Module: Loaded jradius >> jradius: name = "example" >> jradius: primary = "localhost" >> jradius: secondary = "localhost" >> jradius: tertiary = "localhost" >> jradius: timeout = 1 >> jradius: onfail = "NOOP" >> jradius: keepalive = yes >> jradius: connections = 8 >> >>It seems that these parameters are not read at all because if I delete >>them all, I get the same output. >>>From where these parameters are read from? >> >>Sincerely, >>Žagar Jelena >> >> >> >> > >- >List info/subscribe/unsubscribe? See >http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html