I am running FR 2.1.0 OK on SLES10SP1 against edir LDAP backend. The way I did it, I installed the C/C++ Compiler and Tools in the Yast patterned setup. This takes care of a number of dependencies. If you don't want to do this, simply install the required deps later but there will be quite a few of them.
Backup your /etc/raddb and uninstall your existing FR 1.x first. I would suggest deleting /etc/raddb and do a clean slate install. As long as you backed up your config you can refer to the old files. Build using rpmbuild having first extracted the freeradius.spec from the archive and placed in the SPECS folder as per the build instructions on freeradius.org. Depending on the archive you are using, you may need to modify the spec file a bit. Search the list for freeradius.spec. The build process should complete successfully. Any errors you need to post here. When you install the rpms you may need to install some dependencies - using Yast you may need to check the "provides" checkbox if you are searching for a .so file. As I recall (fuzzy memory). Once installed you can run radiusd -X and you may need to chown some of the files in /etc/raddb/certs, the debug output will tell you which ones. Done, now you can modify those config files - especially modules/ldap. 2008/10/28 Hubert Kupper <[EMAIL PROTECTED]>: > I have something to ask. With SLES there comes only freeradius 1.1.0-19.9 > and with this version no Vista Clients can authenticate. I found a 1.1.6-2.1 > rpm and installed it. Now I will update to a newer version but there is no > rpm for SLES 10 available. When I try to compile freeradius v. 2.x then > there are problems with shared libraries they are not available in SLES. On > a Opensuse 11.0 machine the 2.0.5 version runs fine and authenticate against > edirectory. > > Boert > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html