No response so I'm resending this
Marco C. Coelho wrote:
I've been trying to get my second set up IP address' working. The
main_pool works correctly. main_pool2 does not appear to ever issue
more than 2 ip addresses.
you had previously mentioned:
Marco C. Coelho wrote:
>> Did you put "main_pool" and "main_pool" into a fail-over section, as
>> documented in "man unlang" ?
>>
>
> No, and I must be blind, because I have read the section and cannot
> find mention of it.
Sorry, the "redundant" section should do what you want.
Alan DeKok.
I cannot find a redundant section in this radiusd.conf
my radiusd.conf contains:
ippool main_pool {
# range-start,range-stop: The start and end ip
# addresses for the ip pool
range-start = 64.202.227.1
range-stop = 64.202.229.254
# netmask: The network mask used for the ip's
netmask = 255.255.255.0
# cache-size: The gdbm cache size for the db
# files. Should be equal to the number of ip's
# available in the ip pool
cache-size = 762
# session-db: The main db file used to allocate ip's to clients
session-db = ${raddbdir}/db.ippool
# ip-index: Helper db index file used in multilink
ip-index = ${raddbdir}/db.ipindex
# override: Will this ippool override a Framed-IP-Address already set
override = no
# maximum-timeout: If not zero specifies the maximum time in
seconds an
# entry may be active. Default: 0
maximum-timeout = 0
}
ippool main_pool2 {
# range-start,range-stop: The start and end ip
# addresses for the ip pool
range-start = 64.202.237.1
range-stop = 64.202.239.254
# netmask: The network mask used for the ip's
netmask = 255.255.255.0
# cache-size: The gdbm cache size for the db
# files. Should be equal to the number of ip's
# available in the ip pool
cache-size = 762
# session-db: The main db file used to allocate ip's to clients
session-db = ${raddbdir}/db.ippool2
# ip-index: Helper db index file used in multilink
ip-index = ${raddbdir}/db.ipindex2
# override: Will this ippool override a Framed-IP-Address already set
override = no
# maximum-timeout: If not zero specifies the maximum time in
seconds an
# entry may be active. Default: 0
maximum-timeout = 0
}
**********************************It also has:
# Accounting. Log the accounting data.
#
accounting {
#
# Create a 'detail'ed log of the packets.
# Note that accounting requests which are proxied
# are also logged in the detail file.
detail
main_pool
main_pool2
**********************************It also has:
# Post-Authentication
# Once we KNOW that the user has been authenticated, there are
# additional steps we can take.
post-auth {
# Get an address from the IP Pool.
main_pool
main_pool2
#
# If you want to have a log of authentication replies,
# un-comment the following line, and the 'detail reply_log'
# section, above.
------------------------------------------------------------------------
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
