You did have a reply. Ivan Kalik Kalik Informatika ISP
Dana 30/10/2008, "Marco C. Coelho" <[EMAIL PROTECTED]> piše: >No response so I'm resending this > >Marco C. Coelho wrote: >> I've been trying to get my second set up IP address' working. The >> main_pool works correctly. main_pool2 does not appear to ever issue >> more than 2 ip addresses. >> you had previously mentioned: >> >> Marco C. Coelho wrote: >> >>>> >> Did you put "main_pool" and "main_pool" into a fail-over section, as >>>> >> documented in "man unlang" ? >>>> >> >>>> >>> > >>> > No, and I must be blind, because I have read the section and cannot >>> > find mention of it. >>> >> >> Sorry, the "redundant" section should do what you want. >> >> Alan DeKok. >> >> >> I cannot find a redundant section in this radiusd.conf >> >> >> my radiusd.conf contains: >> >> ippool main_pool { >> >> # range-start,range-stop: The start and end ip >> # addresses for the ip pool >> range-start = 64.202.227.1 >> range-stop = 64.202.229.254 >> >> # netmask: The network mask used for the ip's >> netmask = 255.255.255.0 >> >> # cache-size: The gdbm cache size for the db >> # files. Should be equal to the number of ip's >> # available in the ip pool >> cache-size = 762 >> >> # session-db: The main db file used to allocate ip's to clients >> session-db = ${raddbdir}/db.ippool >> >> # ip-index: Helper db index file used in multilink >> ip-index = ${raddbdir}/db.ipindex >> >> # override: Will this ippool override a Framed-IP-Address already set >> override = no >> >> # maximum-timeout: If not zero specifies the maximum time in >> seconds an >> # entry may be active. Default: 0 >> maximum-timeout = 0 >> } >> >> ippool main_pool2 { >> >> # range-start,range-stop: The start and end ip >> # addresses for the ip pool >> range-start = 64.202.237.1 >> range-stop = 64.202.239.254 >> >> # netmask: The network mask used for the ip's >> netmask = 255.255.255.0 >> >> # cache-size: The gdbm cache size for the db >> # files. Should be equal to the number of ip's >> # available in the ip pool >> cache-size = 762 >> >> # session-db: The main db file used to allocate ip's to clients >> session-db = ${raddbdir}/db.ippool2 >> >> # ip-index: Helper db index file used in multilink >> ip-index = ${raddbdir}/db.ipindex2 >> >> # override: Will this ippool override a Framed-IP-Address already set >> override = no >> >> # maximum-timeout: If not zero specifies the maximum time in >> seconds an >> # entry may be active. Default: 0 >> maximum-timeout = 0 >> } >> >> **********************************It also has: >> >> # Accounting. Log the accounting data. >> # >> accounting { >> # >> # Create a 'detail'ed log of the packets. >> # Note that accounting requests which are proxied >> # are also logged in the detail file. >> detail >> main_pool >> main_pool2 >> >> **********************************It also has: >> >> # Post-Authentication >> # Once we KNOW that the user has been authenticated, there are >> # additional steps we can take. >> post-auth { >> # Get an address from the IP Pool. >> main_pool >> main_pool2 >> # >> # If you want to have a log of authentication replies, >> # un-comment the following line, and the 'detail reply_log' >> # section, above. >> >> >> >> >> ------------------------------------------------------------------------ >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html