Hi list, My test connection shows a warning about auth types. Why this error occurs? And how can I fix it? I wonder which configuration files decide that auth type is Accept? Here is log part: rad_recv: Access-Request packet from host 172.30.80.1 port 1806, id=182, length=133 NAS-IP-Address = 172.30.80.1 NAS-Identifier = "GGFILE02" Called-Station-Id = "yasarapn" Framed-Protocol = GPRS-PDP-Context Service-Type = Framed-User NAS-Port-Type = Virtual NAS-Port = 158434808 CHAP-Challenge = 0x665272f56e2480247ac4d7582653a4bd User-Name = "saradinmez" CHAP-Password = 0x012e7599f6a8bfb90c0591fa75fbe19909 Calling-Station-Id = "905308507313" +- entering group authorize {...} expand: %{User-Name} -> saradinmez [preprocess] hints: Matched DEFAULT at 78 expand: %{user-na...@otp -> saradin...@otp ++[preprocess] returns ok [chap] Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop [suffix] Looking up realm "otp" for User-Name = "saradin...@otp" [suffix] Found realm "otp" [suffix] Adding Stripped-User-Name = "saradinmez" [suffix] Adding Realm = "otp" [suffix] Proxying request from user saradinmez to realm otp [suffix] Preparing to proxy authentication request to realm "otp" ++[suffix] returns updated [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound [files] users: Matched entry saradinmez at line 216 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Sending Access-Request of id 27 to 10.1.1.51 port 1812 NAS-IP-Address = 172.30.80.1 NAS-Identifier = "GGFILE02" Called-Station-Id = "yasarapn" Framed-Protocol = GPRS-PDP-Context Service-Type = Framed-User NAS-Port-Type = Virtual NAS-Port = 158434808 CHAP-Challenge = 0x665272f56e2480247ac4d7582653a4bd User-Name := "saradinmez" CHAP-Password = 0x012e7599f6a8bfb90c0591fa75fbe19909 Calling-Station-Id = "905308507313" Proxy-State = 0x313832 Proxying request 0 to home server 10.1.1.51 port 1812 Sending Access-Request of id 27 to 10.1.1.51 port 1812 NAS-IP-Address = 172.30.80.1 NAS-Identifier = "GGFILE02" Called-Station-Id = "yasarapn" Framed-Protocol = GPRS-PDP-Context Service-Type = Framed-User NAS-Port-Type = Virtual NAS-Port = 158434808 CHAP-Challenge = 0x665272f56e2480247ac4d7582653a4bd User-Name := "saradinmez" CHAP-Password = 0x012e7599f6a8bfb90c0591fa75fbe19909 Calling-Station-Id = "905308507313" Proxy-State = 0x313832 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Accept packet from host 10.1.1.51 port 1812, id=27, length=25 Proxy-State = 0x313832 +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop ++[files] returns noop Found Auth-Type = CHAP Found Auth-Type = Accept Warning: Found 2 auth-types on request for user 'saradinmez' !!!!!!!!!!! HERE IS THE PROBLEM I THINK !!!!!!!!!!!!! Auth-Type = Accept, accepting the user +- entering group post-auth {...}
Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup, Yasar Toplulugu Sirketleri bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.The information contained in this e-mail and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and Yasar Group Companies do not accept legal responsibility for the contents. If you are not the intended recipient, please immediately notify the sender and delete it from your system. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html