hello, still with the same issue about vlan assignment.
so to sum up In my users file: ############ doctor Cleartext-Password := "mypass" cisco-avpair= "tunnel-type(#64)=VLAN(13)", cisco-avpair= "tunnel-medium-type(#65) = 802 media(6)", cisco-avpair= "tunnel-private-group-ID(#81) = 100", Session-Timeout = "28800", Termination-Action = "RADIUS-Request" ####################### in my switch -------------------- aaa new-model aaa authentication dot1x default group radius aaa authorization network default group radius dot1x system-auth-control ! interface FastEthernet0/24 => for successful authentication ( client is wired there) switchport access vlan 100 switchport mode access dot1x pae authenticator dot1x port-control auto dot1x auth-fail vlan 120 spanning-tree portfast interface FastEthernet0/22 switchport access vlan 120 switchport mode access spanning-tree portfast ! interface FastEthernet0/23 switchport access vlan 120 switchport mode access spanning-tree portfast radius-server host x.x.x.x auth-port 1812 acct-port 1813 key miamiam radius-server source-ports 1645-1646 radius-server retransmit 5 radius-server vsa send authentication --------------------------- so the authentication for doctor is good in vlan 100, but if i change to cisco-avpair= "tunnel-private-group-ID(#81) = 120", i'm stuck to vlan 100. Any noe can help me? thanks 2010/3/4 Alan DeKok <al...@deployingradius.com> > Jens Link wrote: > > @Alan: I would document VMPS in some more detail in the wiki if my > > access would be working. ;-) > > It seems to be fine now. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html