Thank you Alan.
Since you said that it should work, I re-installed from scratch, and
then re-configured the settings one by one, and it works. I am looking
at the diffs, and I have no idea what I had wrong, but I am happy to
know that at least those settings were correct.
Thanks again,
Cody
On 8/3/10 2:13 PM, Alan DeKok wrote:
Cody Ritts wrote:
I am setting up a new server with a realm to direct some of it's
requests to two existing radius servers (redundant).
This is what I think is the relevant part of my proxy.conf:
...
But when I start the server, 'radiusd -X' dies reporting:
/usr/local/etc/raddb/proxy.conf[744]: Duplicate home server
The config you posted works fine.
( Line 144 refers to this line "home_server radius2 {" )
144 or 744? It makes a difference...
As soon as I remove one of the "home_server = radius2" lines from the
pool, the server will start fine. Also if I change the ports on my
home_server configs, the server will start.
Is this not the correct way to setup redundant realm proxying?
Yes. It should work, if you don't have another copy of the same
config in proxy.conf.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
