Hi, I'm trying to setup Freeradius2 (2.1.7-7) on Red Hat 5.5 to authenticate Windows 802.1x clients on the LAN by Active Directory. Network switches are HP Procurve 2610.
I followed: http://deployingradius.com/documents/configuration/active_directory.html tutorial without any difficulty but PC is unable to authenticate even if I'm not able to see any error in "radiusd -X" output: ##################################################################### FreeRADIUS Version 2.1.7, for host i386-redhat-linux-gnu, built on Dec 30 2009 at 13:47:58 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/control-socket group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client sw-test { require_message_authenticator = no secret = "thankyou" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-PITAGORA} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Instantiating ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=PITAGORA --username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.63.1.207 port 1025, id=46, length=242 Framed-MTU = 1480 NAS-IP-Address = 10.63.1.207 NAS-Identifier = "sw-test" User-Name = "PITAGORA\\testuser" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 3 NAS-Port-Type = Ethernet NAS-Port-Id = "3" Called-Station-Id = "00-12-79-ca-9d-80" Calling-Station-Id = "00-02-3f-31-7e-5d" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "6" EAP-Message = 0x020100210150495441474f52415c6769616e6672616e636f2e63617264696c6c6f Message-Authenticator = 0x23fccd425e446ea9cb372d952782d4ba +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 33 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 46 to 10.63.1.207 port 1025 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x0102001604100ad511f05f27d9673a2f4aa87ec6f29b Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc2330ef2c2310a9b10e022abbe73f133 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.63.1.207 port 1025, id=47, length=233 Framed-MTU = 1480 NAS-IP-Address = 10.63.1.207 NAS-Identifier = "sw-test" User-Name = "PITAGORA\\testuser" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 3 NAS-Port-Type = Ethernet NAS-Port-Id = "3" Called-Station-Id = "00-12-79-ca-9d-80" Calling-Station-Id = "00-02-3f-31-7e-5d" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "6" State = 0xc2330ef2c2310a9b10e022abbe73f133 EAP-Message = 0x020200060319 Message-Authenticator = 0x1433cd9351165311cf6481b2598a2900 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 47 to 10.63.1.207 port 1025 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc2330ef2c330179b10e022abbe73f133 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.63.1.207 port 1025, id=48, length=314 Framed-MTU = 1480 NAS-IP-Address = 10.63.1.207 NAS-Identifier = "sw-test" User-Name = "PITAGORA\\testuser" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 3 NAS-Port-Type = Ethernet NAS-Port-Id = "3" Called-Station-Id = "00-12-79-ca-9d-80" Calling-Station-Id = "00-02-3f-31-7e-5d" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "6" State = 0xc2330ef2c330179b10e022abbe73f133 EAP-Message = 0x0203005719800000004d16030100480100004403014d4fd13cf2eeeab2afebcd0bac01461a f387fed3654bc64abb3342e273f4cab700001600040005000a00090064006200030006001300 12006301000005ff01000100 Message-Authenticator = 0x04a5713d3acefa6a14589feb04cf1fe5 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 87 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 77 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0048], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 48 to 10.63.1.207 port 1025 EAP-Message = 0x0104040019c0000008a216030100310200002d03014d4fd13cc78072b7ad2723a076a86ca1 dcc8644ef4fd8c062bd543bda538c7fc000004000005ff01000100160301085e0b00085a0008 570003a6308203a23082028aa003020102020101300d06092a864886f70d0101040500308193 310b3009060355040613024652310f300d060355040813065261646975733112301006035504 071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e312030 1e06092a864886f70d010901161161646d696e406578616d706c652e636f6d31263024060355 0403131d4578616d706c65204365727469666963617465204175 EAP-Message = 0x74686f72697479301e170d3131303230343134333331345a170d3132303230343134333331 345a307c310b3009060355040613024652310f300d0603550408130652616469757331153013 060355040a130c4578616d706c6520496e632e312330210603550403131a4578616d706c6520 5365727665722043657274696669636174653120301e06092a864886f70d010901161161646d 696e406578616d706c652e636f6d30820122300d06092a864886f70d01010105000382010f00 3082010a0282010100ea55617b68e9f5afb5bda1ccdc3a6bdab724c33edcb047875e2e035dc5 7e07efe2becbdde3f8c77445f0cb61da0a7360e8eabc52c2e909 EAP-Message = 0x982ce71d51aed0cad56be3067d0583d34a62dc33d1265ffada76166d572ce71551697e5395 e0bca3b197ae0003a9afe9c89c55c6a935e267beecb1a28d17a044c932761b9dc28799bcfd92 50ec5f9ed92ee00383e591823bae32f15e1bf33728817b26c51712099afb931166ff2c40d266 e9dbfb6ed6d516bf55c957f49713981e48c578bd0d9450c10bce8173173837d408212e49c386 2f84a2d6ead9b894e2bcdc76f20ac3c9221fe60038fda32c3f3f9e085f721dc1bf87617d1378 4a7c5faec678798a42a173af0203010001a317301530130603551d25040c300a06082b060105 05070301300d06092a864886f70d01010405000382010100bfb1 EAP-Message = 0x34afa9e780cce028160fdbf6426edcd838712aa615cda0542ce21e7b51b72a2a11a5f35740 e1b37f604ad87f825888490576ac0adefb5cde9b49be770f8889a776b1e3c1fcec196080fbc1 f7005961dd91ba29f7a4f79714a43c6a198da71b59d9d74bb644d33df3c762597d635d3fb79b e17cbd95ae7a8fe74cbb4cbf44ad0d6f6a322923f161e48382b2546cc97ff0b608424cfbcd60 91483f08831dc63bb6352d124f66a37b8bbd9ee2f16442c123462dee541f0cd5a77f011a7c60 77134aad0bfabebafde4d4bbeb721fb0e3a10725260e9584a3e621286a7ed7cb7f00668b87e9 37a54805e4fe0b09993b30693725b0f85f187e5fc6626aa62984 EAP-Message = 0x8f0004ab308204a73082038f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc2330ef2c037179b10e022abbe73f133 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.63.1.207 port 1025, id=49, length=233 Framed-MTU = 1480 NAS-IP-Address = 10.63.1.207 NAS-Identifier = "sw-test" User-Name = "PITAGORA\\testuser" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 3 NAS-Port-Type = Ethernet NAS-Port-Id = "3" Called-Station-Id = "00-12-79-ca-9d-80" Calling-Station-Id = "00-02-3f-31-7e-5d" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "6" State = 0xc2330ef2c037179b10e022abbe73f133 EAP-Message = 0x020400061900 Message-Authenticator = 0x03ea01b263bdcbb60dcbc6ca9e56f829 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 49 to 10.63.1.207 port 1025 EAP-Message = 0x010503fc1940a003020102020900cbfbb3c6e6eac293300d06092a864886f70d0101050500 308193310b3009060355040613024652310f300d060355040813065261646975733112301006 035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e 3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d31263024 0603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e 170d3131303230343134333331345a170d3132303230343134333331345a308193310b300906 0355040613024652310f300d0603550408130652616469757331 EAP-Message = 0x12301006035504071309536f6d65776865726531153013060355040a130c4578616d706c65 20496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f 6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72 69747930820122300d06092a864886f70d01010105000382010f003082010a0282010100f09f 04293b15c3fbc1cd487f7e8c2672e6ed9b3f2076497505fcbca6ae04bb1a28a3f71836569feb 0f993d069adf937a3c85171558868dee233085f11f2f749efaa2dd25693d4c8bb36b4c49ecae 5c61d949db07a3520fc38f13908254be3b2d9b75357e130b60b3 EAP-Message = 0x154e657206dfdc54bce402c1786dee6934211b4c40fa5976c6def1794d0b239a509cdf7beb 96bb560fa7ffb595626676db99d8d46ad9baa14beb797bbeb2a40bd823e31515dcf97843f821 43780c76238000bacc252381e46118aba2048529df1de0a840bf3bf649104b0800bd1d2f4bc9 08421cccdc648783d3392045c90a0e3fe023e2d66afa9d1e9dfd130bf99a5437511bf7606629 e90203010001a381fb3081f8301d0603551d0e041604142fad8e1834baf2c00ff7a992e1ac5f f2a59c840a3081c80603551d230481c03081bd80142fad8e1834baf2c00ff7a992e1ac5ff2a5 9c840aa18199a48196308193310b300906035504061302465231 EAP-Message = 0x0f300d060355040813065261646975733112301006035504071309536f6d65776865726531 153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d01090116 1161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c652043 6572746966696361746520417574686f72697479820900cbfbb3c6e6eac293300c0603551d13 040530030101ff300d06092a864886f70d01010505000382010100324abb2820dac845e24553 75ecb04b30eaa4430dd010afea712210be69f74e194e4a06eeb2fffc584ef62549b0751eeb80 5f64ac9f6a3e31c5703dc7e0d53b670215dd7731c9cc2ca45bde EAP-Message = 0x50458bff45c56032 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc2330ef2c136179b10e022abbe73f133 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.63.1.207 port 1025, id=50, length=233 Framed-MTU = 1480 NAS-IP-Address = 10.63.1.207 NAS-Identifier = "sw-test" User-Name = "PITAGORA\\testuser" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 3 NAS-Port-Type = Ethernet NAS-Port-Id = "3" Called-Station-Id = "00-12-79-ca-9d-80" Calling-Station-Id = "00-02-3f-31-7e-5d" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "6" State = 0xc2330ef2c136179b10e022abbe73f133 EAP-Message = 0x020500061900 Message-Authenticator = 0x737833619f69c6a5a575256d21bd42d6 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 50 to 10.63.1.207 port 1025 EAP-Message = 0x010600bc1900ddb966ad449ebce7845bd0ae07480e65bea3e8ea663b5e63a7611dcaf8a7c0 846188c452db0cf8e0ef66c0e43f953dd2ed2b8e87682cd1315c717c80e4fab9855f30cd20ea 93f250fb30d75fff92212902209b8debc5f3083e50740f5fa92e24c053893f86f3688e113ef1 1c609f6536860396bb10842f6345d4c4abbea751aa0655f7a2def230abcefa504fac484df327 65271397e546271e2dbd4f8bfa26c5d83d7c74df6f01440a6a2f4f9816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc2330ef2c635179b10e022abbe73f133 Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.63.1.207 port 1025, id=51, length=549 Framed-MTU = 1480 NAS-IP-Address = 10.63.1.207 NAS-Identifier = "sw-test" User-Name = "PITAGORA\\testuser" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 3 NAS-Port-Type = Ethernet NAS-Port-Id = "3" Called-Station-Id = "00-12-79-ca-9d-80" Calling-Station-Id = "00-02-3f-31-7e-5d" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "6" State = 0xc2330ef2c635179b10e022abbe73f133 EAP-Message = 0x02060140198000000136160301010610000102010013a4a5cfa0977e0775057b68fa525204 043b1eb0bc219d09f048fe6d63e032aa3ac386d0383ebddbb468498ab5efb55714eaddc7681b 7ecd1eb9c6561a094cc52aed59125ce5ff1150671baec79edc87eec83138fbe4ce3a64f49fd9 e76554acdae5a127cbd4164b568c60c20a682220e3cb9dc68b46a455cccaa247a609f01a134c 8f1fd66975dad840ff3c7b040defd618918c73da49f561a857a3177682e27fc67c940261251d 9d8c725eb70e45eaaf79fc898f9f8efa8162011d0bca0212b4aff0ea8ca6e3b3796e490a84e7 efbf0d8db98c70c9e2d70dae38ba5ed6411e2a946fb9aae29033 EAP-Message = 0x465b5a926f959280200fe13d2dae18498f78c53798248f9914030100010116030100207dc5 1c2e15af596e0698dd6108a1aa3d0fcea328015ba5354de641c979dc2020 Message-Authenticator = 0x16550f99a63143672ac90b00dbd3114b +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 310 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 51 to 10.63.1.207 port 1025 EAP-Message = 0x01070031190014030100010116030100205ade2f3e33e8685e52df75423f2473025edd9c2f cf68c03232281c39f616dca1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc2330ef2c734179b10e022abbe73f133 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.63.1.207 port 1025, id=52, length=233 Framed-MTU = 1480 NAS-IP-Address = 10.63.1.207 NAS-Identifier = "sw-test" User-Name = "PITAGORA\\testuser" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 3 NAS-Port-Type = Ethernet NAS-Port-Id = "3" Called-Station-Id = "00-12-79-ca-9d-80" Calling-Station-Id = "00-02-3f-31-7e-5d" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "6" State = 0xc2330ef2c734179b10e022abbe73f133 EAP-Message = 0x020700061900 Message-Authenticator = 0x26998eddde82022fa49c43d7b4ebb76a +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 52 to 10.63.1.207 port 1025 EAP-Message = 0x01080020190017030100154b7b5dd4c4f406c163805dec8c21607a8babdad020 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc2330ef2c43b179b10e022abbe73f133 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.63.1.207 port 1025, id=53, length=283 Framed-MTU = 1480 NAS-IP-Address = 10.63.1.207 NAS-Identifier = "sw-test" User-Name = "PITAGORA\\testuser" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 3 NAS-Port-Type = Ethernet NAS-Port-Id = "3" Called-Station-Id = "00-12-79-ca-9d-80" Calling-Station-Id = "00-02-3f-31-7e-5d" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "6" State = 0xc2330ef2c43b179b10e022abbe73f133 EAP-Message = 0x020800381900170301002d089df87f8e1e5987ef1792c8925e1194dc3b9a7d372f23a69484 fb4dffcfac64811aae3e366003e7f13d79d7a3 Message-Authenticator = 0xa585cf547907140181f7b8426dca155e +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 56 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - PITAGORA\testuser [peap] Got tunneled request EAP-Message = 0x020800210150495441474f52415c6769616e6672616e636f2e63617264696c6c6f server { PEAP: Got tunneled identity of PITAGORA\testuser PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to PITAGORA\testuser Sending tunneled request EAP-Message = 0x020800210150495441474f52415c6769616e6672616e636f2e63617264696c6c6f FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "PITAGORA\\testuser" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 8 length 33 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010900361a010900311014d6c9e2f9cb4a58554df2cb29adb0a950495441474f52415c6769 616e6672616e636f2e63617264696c6c6f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x37523e80375b245973dcd634f3fc6f7a [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010900361a010900311014d6c9e2f9cb4a58554df2cb29adb0a950495441474f52415c6769 616e6672616e636f2e63617264696c6c6f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x37523e80375b245973dcd634f3fc6f7a [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 53 to 10.63.1.207 port 1025 EAP-Message = 0x0109004d190017030100429b5f32184f610613f00b1cce946385098a8eff56bfd4be135578 680f6b0dff1f5ed1ac0d1678088067a3ab3d5e9242114e5e7a0d7290bdf6ad92bf5d4efb6816 cffb Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc2330ef2c53a179b10e022abbe73f133 Finished request 7. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.63.1.207 port 1025, id=54, length=337 Framed-MTU = 1480 NAS-IP-Address = 10.63.1.207 NAS-Identifier = "sw-test" User-Name = "PITAGORA\\testuser" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 3 NAS-Port-Type = Ethernet NAS-Port-Id = "3" Called-Station-Id = "00-12-79-ca-9d-80" Calling-Station-Id = "00-02-3f-31-7e-5d" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "6" State = 0xc2330ef2c53a179b10e022abbe73f133 EAP-Message = 0x0209006e19001703010063f8651686a818b10b399c346b7e7d55f1ed23cd3c68c02aab5143 e156b46c87f3b06be3a6546fbdc9fe76ae1250c4900db2a0a246a229176bfc8ecfc564d274dc fde0c6f1b4c6856045202ac081856d1788e1728ef297877b9f889710a290ec845bdf45 Message-Authenticator = 0xa10bdae95be3fb4f160fea338874c85a +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 110 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020900571a02090052318b237fb97c62ee51a148a9f160c34b6c000000000000000070e882 9b2758fcac1999a7165374bbef5f406c32951a8d1c0050495441474f52415c6769616e667261 6e636f2e63617264696c6c6f server { PEAP: Setting User-Name to PITAGORA\testuser Sending tunneled request EAP-Message = 0x020900571a02090052318b237fb97c62ee51a148a9f160c34b6c000000000000000070e882 9b2758fcac1999a7165374bbef5f406c32951a8d1c0050495441474f52415c6769616e667261 6e636f2e63617264696c6c6f FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "PITAGORA\\testuser" State = 0x37523e80375b245973dcd634f3fc6f7a server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "PITAGORA\testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 9 length 87 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv2 for testuser with NT-Password [mschap] expand: --username=%{mschap:User-Name:-None} -> --username=testuser [mschap] expand: %{mschap:NT-Domain} -> PITAGORA [mschap] expand: --domain=%{%{mschap:NT-Domain}:-PITAGORA} -> --domain=PITAGORA [mschap] mschap2: 14 [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=fb9a84f7a072a61e [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=70e8829b2758fcac1999a7165374bbef5f406c32951a8d1c Exec-Program output: NT_KEY: 5E93A783937468FDED71B619F0781AD4 Exec-Program-Wait: plaintext: NT_KEY: 5E93A783937468FDED71B619F0781AD4 Exec-Program: returned: 0 [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010a00331a0309002e533d4341303635413435333430423234384542433237433546463731 3133303545423545354633383131 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x37523e803658245973dcd634f3fc6f7a [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010a00331a0309002e533d4341303635413435333430423234384542433237433546463731 3133303545423545354633383131 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x37523e803658245973dcd634f3fc6f7a [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 54 to 10.63.1.207 port 1025 EAP-Message = 0x010a004a1900170301003f89859944848beaa1a1150d04b44af7343d3f0867517b48dcfa7c 1a3a38468e2c7f73a4a6d760ee589d34d3ae808c8fe81be20e246f39c054d1efa38ae39490 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc2330ef2ca39179b10e022abbe73f133 Finished request 8. Going to the next request Waking up in 4.8 seconds. Cleaning up request 0 ID 46 with timestamp +31 Cleaning up request 1 ID 47 with timestamp +31 Cleaning up request 2 ID 48 with timestamp +31 Cleaning up request 3 ID 49 with timestamp +31 Cleaning up request 4 ID 50 with timestamp +31 Cleaning up request 5 ID 51 with timestamp +31 Cleaning up request 6 ID 52 with timestamp +31 Cleaning up request 7 ID 53 with timestamp +31 Cleaning up request 8 ID 54 with timestamp +31 Ready to process requests. ############################################################################ ########### Any help? Thanks in advance -- DV - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html