Thanks,
I put the update Load-Balance-Key right at the top of the authorize section in
the ../sites-enabled/default...
that seems to be working pretty well...
I'll look more at the client-port-balance ...
thanks,
Robert
________________________________________
From: freeradius-users-bounces+robert.roll=utah....@lists.freeradius.org
[freeradius-users-bounces+robert.roll=utah....@lists.freeradius.org] On Behalf
Of Phil Mayers [p.may...@imperial.ac.uk]
Sent: Wednesday, March 23, 2011 3:47 PM
To: freeradius-users@lists.freeradius.org
Subject: Re: Load Balancing EAP with freeradius...
On 03/23/2011 08:56 PM, Robert Roll wrote:
>
> I'd like to try load balancing EAP/PEAP/MSCHAPV2 using freeradius. I looked
> at the proxy.conf and it seems
> that there are two options, because you have to insure the same end client
> talks to the
> same radius server. There seems to be client-balance that uses IP source
> addresses and
We use client-port-balance. IIRC this is the recommended method for UK
eduroam sites.
> there is Load-Balance-Key something like
>
> update control {
> Load-Balance-Key := "%{NAS-IP-Address} %{NAS-Port} %{User-Name}
> %{Calling-Station-ID}"
> }
Huh. Neat. I hadn't seen that.
>
> Currently, we have a Radiator server that uses client mac-addresses for
> this purpose. If I do
> want to use the Load-Balance-Key, I'm honestly not sure where to put the
> update of the
> Load-Balance-Key.. Does it go in the proxy.conf ?
That's an unlang statement, so it goes in a radius virtual server. Since
you want to use it for proxying you will have to do it in the
"authorize" section (or maybe pre-proxy) e.g.
/etc/raddb/sites-enabled/default:
authorize {
update control {
Load-Balance-Key = "%{Calling-Station-Id}"
}
}
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
