Hi Alan and thanks for your reply, I changed it as you suggested and I still got the same behavior:
Users wassim Cleartext-Password := "wassim" Tunnel-Medium-Type = IEEE-802, Tunnel-Type = VLAN, Tunnel-Private-Group-Id = 100 Radiusd -X: # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel } # server inner-tunnel [ttls] Got tunneled reply code 2 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Type:0 = VLAN Tunnel-Private-Group-Id:0 = "100" [ttls] Got tunneled Access-Accept [eap] Freeing handler ++[eap] returns ok # Executing section post-auth from file /etc/raddb/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 137 to 192.168.1.8 port 1645 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Type:0 = VLAN Tunnel-Private-Group-Id:0 = "100" MS-MPPE-Recv-Key = 0x28911c2a106aee9ae42700d2cabd1de93803a84259a4d669e7c0a72ca07454bf MS-MPPE-Send-Key = 0xf4742fbc2193f49eef63f8d8f92a225be5ddbba4a5946456ad51acba72eecb32 EAP-Message = 0x03060004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "wassim" Cisco Switchh: 4w0d: RADIUS: Message-Authenticato[80] 18 4w0d: RADIUS: 8D 41 75 97 26 ED 72 23 97 F7 59 57 1F B7 6A 04 [?Au?&?r#??YW??j?] 4w0d: RADIUS: Received from id 1645/137 192.168.1.57:1812, Access-Accept, len 185 4w0d: RADIUS: authenticator 94 1E 2A 28 2E 35 8C 55 - B6 BA 85 CE EC AF 42 57 4w0d: RADIUS: Tunnel-Medium-Type [65] 6 00:Unsupported [6] 4w0d: RADIUS: Tunnel-Type [64] 6 00:Unsupported [13] 4w0d: RADIUS: Tunnel-Private-Group[81] 5 "100" 4w0d: RADIUS: Vendor, Microsoft [26] 58 4w0d: RADIUS: MS-MPPE-Recv-Key [17] 52 On 4/25/12 10:36 AM, "alan buxey" <a.l.m.bu...@lboro.ac.uk> wrote: >Hi, > >> I know this subject have been brought up but I'm kind of stuck and I >>hope >> I can get a little help. >> I am trying to assign vlans from freeradius to a cisco 3550 switch >>but its >> not working. >> I keep getting the following in the debug in the switch: >> >> 3w6d: RADIUS: Tunnel-Medium-Type [65] 6 01:Unsupported >> [6] >> >> 3w6d: RADIUS: Tunnel-Type [64] 6 01:Unsupported >> >> [13] >> >> I read the mail archives and googled with no luck. >> >> Users file configuration: >> >> wassim Cleartext-Password := "wassim" >> >> Tunnel-Medium-Type:1 = IEEE-802, >> >> Tunnel-Type:1 = VLAN, >> >> Tunnel-Private-Group-Id:1 = 100 > > >what documents were you following? > >your stuff is close...but wrong. I dont know why you have added the :1 >stuff, its much simpler than that > > >wassim Cleartext-Password := "wassim" > Tunnel-Medium-Type = IEEE-802, > Tunnel-Type = VLAN, > Tunnel-Private-Group-Id = 100 > > >alan >- >List info/subscribe/unsubscribe? See >http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html