IP tables is disabled and I can ping the NAS server bring the Radius client - Cisco 7301 successfully
Is there anything else that I can check? -----Original Message----- From: freeradius-users-bounces+shawkys=ivox.com...@lists.freeradius.org [mailto:freeradius-users-bounces+shawkys=ivox.com...@lists.freeradius.org] On Behalf Of Fajar A. Nugraha Sent: Monday, 7 May 2012 5:21 PM To: FreeRadius users mailing list Subject: Re: NAS Client On Mon, May 7, 2012 at 2:08 PM, Shawky Skaff <shaw...@ivox.com.au> wrote: > > I've setup a NAS client that being a cisco7301 and have entered this > into clients.conf. When I run radiusd -X and do the following radtest > eftel-test > test123 27.34.225.253 1812 testing123, it fails, I don't get anything > appearing on my debug radiusd -X screen. The usual suspect would be firewall (e.g. iptables). Try disabling it temporarily, and make sure basic connectivity (e.g. ping) works. -- Fajar - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html