On 2/18/13, a.l.m.bu...@lboro.ac.uk <a.l.m.bu...@lboro.ac.uk> wrote: > Hi, > >> Thankfully, this isn't correct. You can use "eapol_test" which comes >> with the "wpa_supplicant" source to test pretty much every EAP type >> there is, including EAP-TLS. >> >> To the OP - download wpa_supplicant sources and build eapol_test. > > eapol_test is VERY powerful.....and there are even little test scripts > provided > in the FreeRADIUS source > > however, if you want clicky GUI then also look at JRadius Simulator: > > http://www.coova.org/JRadius/Simulator > > (but this mailing list isnt a support forum for either of those tools!) > > alan > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > thanx A.L.M,,, but actually I am not aware of what to send in request of EAP-TLS. I have followed the README in /raddb/certs/ and make the CA, CLIENT and SERVER certificate. Now I request to the server with eapol_test, with following parameter netwrok={ eap=TLS eapol_flags=0 key_mgmt=IEEE8021X identity="bob" ca_cert="/usr/local/etc/raddb/certs/ca.pem" client_cert="/usr/local/etc/raddb/certs/client.pem" private_kry="/usr/local/etc/raddb/certs/server.key" private_key_passwd="whatever" }
but this request give me a FAILURE response. I have googled a lot to find my appropriate answer, ( what need to send in client request etc etc). - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html