Am Sonntag, den 13.07.2014, 14:49 +0200 schrieb Fabien Bodard: > they are hard coded... > > 2014-07-13 0:33 GMT+02:00 Karl Reinl <karl.re...@fen-net.de>: > > Am Sonntag, den 13.07.2014, 00:23 +0200 schrieb Benoît Minisini: > >> Le 13/07/2014 00:18, Karl Reinl a écrit : > >> > Salut, > >> > > >> > do I have a chance to read out printer.paper sizes within gambas? > >> > > >> > >> No, but they normally should be standard paper sizes (i.e. A4 is always > >> 210mm x 297mm). > >> > > Ok, not good asked. > > > > do I have a chance to read out paper formats available for a printer, as > > used as list in printer.config dialog stored in printer.paper? > > -- > > Amicalement > > Charlie
Thanks Fabien, yes, that what I also found out. gambas3 only know "A3","A4","A5","B5","Letter","Executive","Legal", all others are "Custom" with PaperHeight and PaperWidth set. I digged deeper and found out, for qt4: - you can't set paper to 0="Custom" (you get default Paper, here "A4") - if you write to Printer.PaperHeight and/or Printer.PaperWidth, Paper change to 0="Custom" - after Printer.configure() the printer object knows all his properties, as they where made during Printer.configure, but not Printer.NumCopies it is reset to 1 -- Amicalement Charlie ------------------------------------------------------------------------------ _______________________________________________ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user