Great minds think alike; I'm currently doing that. Caps are cheap, so for the srams example, I'm using 0.1uF at each power pin (16 total), and 1uF at the end of each sram bus (eight total). Plus scattering some 10uF (also 0603 ceramic) around.
Hmmm, do you actually have 10uF 0603 ceramic caps in hand? I'd bet dollars to doughnuts that you either haven't looked for them, or your haven't ordered them yet (so you haven't found out that they are only brochureware). The reason I say that is that you can't get 10uF 0603 ceramic caps . . . to the best of my knowledge that is. The 0603 package is too small to support 10uF. Getting 10uF into 1206 is pushing it. I'm willing to be proven wrong, of course, but you should at least be aware that 10uF in a 0603 package is a stretch. You're better off with Ta caps when you get to these larger values since your options for procuring real parts are much better. Stuart _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user