Hi, I am working on my first geda schematics for a simple LC meter (in my free time which is scarse and so this effort has stretched into weeks). The schematics can be found at:
http://www.amqrp.org/kits/elsie/ELSIE_BA.PDF I completed the schematics and ran the DRC2 check with this command: gnetlist -g drc2 lcm.sch -o - The output is (after removing irrelevant stuff): Checking non-numbered parts... Checking pins without the 'pintype' attribute... NOTE: Found pins without the 'pintype' attribute: U101:1 U105:7 U105:3 U105:8 U101:3 U105:2 U105:4 U101:2 Checking type of pins connected to a net... Checking unconnected pins... ERROR: Unconnected pin U102:11 ERROR: Unconnected pin U102:8 ERROR: Unconnected pin U102:2 ERROR: Unconnected pin U102:19 ERROR: Unconnected pin U102:18 ERROR: Unconnected pin U102:17 ERROR: Unconnected pin U102:16 ERROR: Unconnected pin U102:14 ERROR: Unconnected pin U102:13 ERROR: Unconnected pin U102:12 ERROR: Unconnected pin U105:1 ... ... Now, I connected the 'nc' symbol to all the unconnected pins of U102 and those errors vanished. U105 is LM311 symbol from the geda standard installation and pin 1 of the symbol comes connected to GND. But DRC complains that it is unconnected? What am I doing wrong here? Thanks -- Ramakrishnan - VU3RDD _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user